Normal Distribution Calculators
Free normal distribution calculators: probabilities below, above or between values, inverse normal, z-scores, percentiles and the 68-95-99.7 rule.
Open the Normal Distribution CalculatorUpdated · Formulas and conventions follow our methodology
In short
The normal distribution is the symmetric, bell-shaped curve defined by its mean μ and standard deviation σ. Test scores, heights and measurement errors are often close to normal, and sample means become approximately normal as the sample size grows. The calculators on this hub find the area below, above, between or outside values on any normal curve, turn an area back into a value, and convert between raw scores, z-scores and percentiles.
Normal distribution calculator
Enter a mean, a standard deviation and one or two values in the Normal Distribution Calculator to get the probability with the curve shaded and every step shown.
- P(X < x) and P(X > x)
- P(a < X < b) between two values
- P(X < a or X > b) outside two values
- z-score for each value
- Shaded bell curve
- Step-by-step working
All 8 normal distribution calculators
From a value to a probability
Area under the curve below, above or between values, or the percentile of a z-score.
- Normal Distribution CalculatorP(X < x), P(X > x) or P(a < X < b) for any normal distribution, with the curve shaded.
- Z-Score Probability CalculatorArea under the standard normal curve left of, right of, from 0 to, between or outside z-scores.
- Z-Score to Percentile CalculatorConvert a z-score into the percentile it represents.
From a probability back to a value
The cutoff for a given area or percentile, such as the top 10%.
- Inverse Normal Distribution CalculatorFind the value x (and its z-score) that cuts off a given area of a normal distribution, like invNorm.
- Percentile to Z-Score CalculatorFind the z-score that sits at any percentile of the standard normal.
- Raw Score CalculatorTurn a z-score or percentile back into an original value with x = μ + zσ.
Z-scores and quick ranges
Standardize a value, or get the 1σ, 2σ and 3σ ranges at a glance.
Standardize, then read the area
Every normal distribution has the same shape; only the center and the width change. Subtracting the mean and dividing by the standard deviation, z = (x − μ) / σ, turns any normal variable into the standard normal Z, with mean 0 and standard deviation 1. The probability you want is then an area under that one curve: Φ(z) to the left of z, 1 − Φ(z) to the right. That is why a single normal distribution table, the z table, serves every normal problem. The calculators here do the same lookup exactly, without rounding z to two decimal places, for any mean and standard deviation.
Normal problems run in two directions. Forward, from a value to a probability: what share of scores fall below 130? Use the Normal Distribution Calculator, the Z-Score Probability Calculator or the Z-Score to Percentile Calculator. Inverse, from a probability to a value: what score marks the top 10%? Use the Inverse Normal Distribution Calculator, the Percentile to Z-Score Calculator or the Raw Score Calculator. For quick 1σ, 2σ and 3σ ranges, the Empirical Rule Calculator applies the 68-95-99.7 rule; the exact shares are 68.27%, 95.45% and 99.73%.
How to find a normal probability
- Write the question as an area. “Less than x” is P(X < x), “more than x” is P(X > x), “between a and b” is P(a < X < b), and “outside a and b” is P(X < a) + P(X > b). For a continuous distribution, < and ≤ give the same answer.
- Standardize each value with z = (x − μ) / σ.
- Read the left-tail area Φ(z) from the z table or a calculator.
- Combine the areas. Use 1 − Φ(z) for a right tail, Φ(z_b) − Φ(z_a) for an interval, and 1 minus the interval for the two outer tails.
- Check the answer against the curve. A value above the mean must have a left-tail area above 0.5; a value two standard deviations out leaves about 2.3% in its tail.
Normal distribution worked examples
One example for each kind of question. Each one runs in the Normal Distribution Calculator or the Inverse Normal Distribution Calculator with the same inputs.
Below a value: IQ under 120
Problem. IQ scores are scaled to a normal distribution with μ = 100 and σ = 15. What share of people score below 120?
- 01Standardize 120.z = (120 − 100) / 15 = 1.333
- 02Take the left-tail area.P(X < 120) = Φ(1.333) = 0.9088
Answer. About 90.9% of people score below 120, so 120 sits near the 91st percentile.
Above a value: heights over 75 inches
Problem. Suppose adult heights in a group are normal with μ = 69 in and σ = 3 in. What share are taller than 75 in?
- 01Standardize 75.z = (75 − 69) / 3 = 2
- 02Take the right tail, the complement of the left-tail area.P(X > 75) = 1 − Φ(2) = 1 − 0.9772 = 0.0228
Answer. About 2.3% are taller than 75 inches, roughly 1 person in 44.
Between two values: exam scores from 60 to 84
Problem. Exam scores are normal with μ = 72 and σ = 8. What share of students score between 60 and 84?
- 01Standardize both values.z₁ = (60 − 72) / 8 = −1.5z₂ = (84 − 72) / 8 = 1.5
- 02Subtract the smaller left-tail area from the larger.P(60 < X < 84) = Φ(1.5) − Φ(−1.5) = 0.9332 − 0.0668 = 0.8664
Answer. About 86.6% of students score between 60 and 84.
Outside two values: bolts out of tolerance
Problem. Bolt lengths are normal with μ = 10 mm and σ = 0.02 mm. Bolts shorter than 9.95 mm or longer than 10.05 mm are rejected. What share is rejected?
- 01Standardize both limits.z = (9.95 − 10) / 0.02 = −2.5z = (10.05 − 10) / 0.02 = 2.5
- 02Add the two tail areas; by symmetry they are equal.P(outside) = Φ(−2.5) + 1 − Φ(2.5) = 2 × 0.0062 = 0.0124
Answer. About 1.24% of bolts are rejected, roughly 1 in 81.
Inverse: the score that marks the top 10%
Problem. With exam scores normal, μ = 72 and σ = 8, what score do students need to finish in the top 10%?
- 01The top 10% starts at the 90th percentile, so find the z with a left-tail area of 0.90.z = Φ⁻¹(0.90) = 1.2816
- 02Convert z back to a raw score.x = μ + zσ = 72 + 1.2816 × 8 = 82.25
Answer. A score of about 82.3 or higher puts a student in the top 10%.
Which normal distribution calculator should I use?
| If you want to… | Use |
|---|---|
| If you want P(X < x), P(X > x) or P(a < X < b) for any mean and standard deviation | |
| If you know an area or percentile and want the matching x value | |
| If you want to standardize a value into a z-score | |
| If you already have z and want the area under the standard normal curve | |
| If you want to turn a z-score into a percentile rank | |
| If you want the z-score at a given percentile, such as the 90th | |
| If you have a z-score and want the original value back | |
| If you want quick ranges for 1, 2 and 3 standard deviations | |
| If you are approximating a binomial probability with a normal curve |
Normal distribution formulas
| Concept | Formula | Example (μ = 100, σ = 15) |
|---|---|---|
| z-score | z = (x − μ) / σ | x = 130 gives z = 2 |
| Raw score | x = μ + zσ | z = −1 gives x = 85 |
| Density (PDF) | f(x) = e^(−(x − μ)² / (2σ²)) / (σ√(2π)) | Highest at x = 100 |
| Left-tail probability (CDF) | P(X ≤ x) = Φ(z) | P(X ≤ 130) = 0.9772 |
| Right-tail probability | P(X ≥ x) = 1 − Φ(z) | P(X ≥ 130) = 0.0228 |
| Between two values | P(a ≤ X ≤ b) = Φ(z_b) − Φ(z_a) | P(85 ≤ X ≤ 115) = 0.6827 |
| Inverse normal | x = μ + σ · Φ⁻¹(p) | 90th percentile = 119.22 |
| Empirical rule | μ ± 1σ, 2σ, 3σ contain about 68%, 95%, 99.7% | 85–115, 70–130, 55–145 |
Normal distribution terms
| Term | Meaning |
|---|---|
| Normal distribution | A continuous, symmetric, bell-shaped distribution set by its mean μ and standard deviation σ. Also called the Gaussian distribution or bell curve. |
| Standard normal distribution | The normal distribution with μ = 0 and σ = 1, written Z. Every normal variable becomes Z after standardizing. |
| Random variable | A quantity whose value depends on chance, such as the score of a randomly chosen student. X usually denotes a normal variable. |
| Mean, μ | The center of the curve. The mean, median and mode of a normal distribution are equal. |
| Standard deviation, σ | The typical distance from the mean. It sets how wide the curve is; the inflection points sit at μ ± σ. |
| Raw score | An original value x, in the units of the data, such as an IQ of 120 or a height of 75 inches. |
| z-score | The number of standard deviations a raw score lies from the mean: z = (x − μ) / σ. |
| Probability | For a continuous distribution, the area under the curve over a range of values. The area under the whole curve is 1. |
| Cumulative probability, Φ(z) | The area to the left of a value, P(X ≤ x). The cumulative distribution function (CDF) gives it, and the z-table lists it. |
| Percentile | The cumulative probability written as a percentage: a value with Φ(z) = 0.84 is at the 84th percentile. |
Frequently asked questions
What is the standard normal distribution?
How do I find a probability from a z-score?
What percentage of the data is below a z-score of −1?
What percentage of data falls within 1, 2 and 3 standard deviations of the mean?
What is the difference between a z-score and a percentile?
How do I calculate normal probabilities on a TI-84 or in Excel?
How can I tell if my data are approximately normal?
Looking for something else? See all calculators or search the site.