Skip to content
Statculator
Descriptive Statistics

Kurtosis Calculator

Free kurtosis calculator: paste data to get sample (Excel KURT) and population excess kurtosis, the standard error, a z test and step-by-step working.

Free, no sign-up Runs in your browserBy Hira Noor, BS MathematicsUpdated

Try
13 values

At least 4 values, separated by commas, spaces or line breaks. Kurtosis needs larger samples than most statistics; 30 or more is better.

Results

Sample excess kurtosis, G₂
3.9422
0 for a normal distribution (Excel KURT, SPSS, SAS)
Population excess kurtosis, g₂
2.1526
m₄ / m₂² − 3

Leptokurtic: heavier tails than a normal distribution

z = G₂ / SEK = 3.31. This is beyond ±1.96, so the tail weight differs significantly from a normal distribution at about the 5% level.

Count, n
13
Mean
51.9231
Sample SD, s
5.2035
Second central moment, m₂
24.9941
Fourth central moment, m₄
3218.8579
Pearson (raw) kurtosis, b₂ = m₄ / m₂²
5.1526
Sample raw kurtosis, G₂ + 3
6.9422
Standard error of kurtosis, SEK
1.1909
z = G₂ / SEK
3.3103
Sample skewness, G₁ (for context)
0.0266

Interpretation: G₂ = 3.9422 is positive: compared with a normal distribution with the same SD, these data have more of their spread in rare, extreme values and more values close to the center.

  • With 13 values the kurtosis estimate is very imprecise (SE = 1.19). Kurtosis is driven by the few most extreme observations, so a single value can change it a lot.
  • The values 64 and 40 together contribute 99% of Σ(x − x̄)⁴, so they largely determine the kurtosis.
Distribution of the dataDistribution of the data0246810Frequency40 to 45: 1145 to 50: 1150 to 55: 9955 to 60: 1160 to 65: 11404550556065Value

Moment table

#xx − x̄(x − x̄)²(x − x̄)⁴
1520.07690.00593.5013 × 10⁻⁵
248-3.923115.3905236.8685
3531.07691.15981.3451
451-0.92310.85210.726
56412.0769145.852121272.8266
6520.07690.00593.5013 × 10⁻⁵
750-1.92313.698213.6769
8542.07694.313618.6072
9520.07690.00593.5013 × 10⁻⁵
1040-11.9231142.159820209.3983
11531.07691.15981.3451
12553.07699.467589.6327
1351-0.92310.85210.726
Σ6750324.923141845.1525

Step-by-step solution

  1. 1

    Find the mean

    x̄ = 675 / 13 = 51.9231
  2. 2

    Find the second and fourth central moments

    Average the squared and fourth-power deviations (dividing by n). The moment table lists every term.

    m₂ = Σ(x − x̄)² / n = 324.9231 / 13 = 24.9941
    m₄ = Σ(x − x̄)⁴ / n = 41845.1525 / 13 = 3218.8579
  3. 3

    Compute the raw (Pearson) kurtosis and subtract 3

    A normal distribution has raw kurtosis 3, so subtracting 3 gives excess kurtosis, which is 0 for normal data.

    b₂ = m₄ / m₂² = 3218.8579 / 24.9941² = 5.1526
    g₂ = b₂ − 3 = 2.1526
  4. 4

    Adjust for sample size to get G₂

    G₂ = [(n + 1)g₂ + 6](n − 1) / [(n − 2)(n − 3)]
    G₂ = [14 × 2.1526 + 6] × 12 / (11 × 10) = 3.9422
  5. 5

    Find the standard error and z

    SES = √[6n(n − 1) / ((n − 2)(n + 1)(n + 3))] = 0.6163
    SEK = 2 × SES × √[(n² − 1) / ((n − 3)(n + 5))] = 2 × 0.6163 × √(168 / (10 × 18)) = 1.1909
    z = G₂ / SEK = 3.9422 / 1.1909 = 3.3103

What is a Kurtosis Calculator?

A kurtosis calculator measures how heavy the tails of a distribution are, that is how prone the data are to extreme values. To calculate kurtosis, divide the fourth central moment by the squared variance (m₄ / m₂²), then subtract 3 to get excess kurtosis, which is 0 for a normal distribution. Positive excess kurtosis (leptokurtic) means heavier tails; negative (platykurtic) means lighter tails.

What the Kurtosis Calculator does

Paste your data to get the sample excess kurtosis G₂ (Excel’s KURT, SPSS, SAS) and the population excess kurtosis g₂ (SciPy’s default), plus the raw Pearson kurtosis, the standard error of kurtosis, a z statistic, a histogram and a table of fourth-power deviations. Calculating kurtosis by hand takes a column of fourth powers and four formulas; the step-by-step solution shows every one with your numbers, so you can check homework or software output line by line.

The sample skewness is shown beside the kurtosis, so the page also works as a skewness and kurtosis calculator for a quick shape check. Kurtosis tells you about outlier-proneness. High kurtosis warns that rare, extreme values are more common than a normal model predicts, which matters for risk models, control limits and any method that assumes normal errors. Despite a common textbook description, kurtosis says little about how “peaked” the center is; it is dominated by the tails.

How to use the Kurtosis Calculator

  1. Type or paste at least four numbers into Data values, separated by commas, spaces or line breaks. A column copied from Excel or Google Sheets works. Thirty or more values give a much more stable estimate.
  2. Read G₂ and g₂ at the top. Remember they are excess kurtosis: 0 is the normal benchmark.
  3. Check the verdict for leptokurtic or platykurtic wording and the z test against normal tails.
  4. Open the moment table and steps to see m₂, m₄, the raw kurtosis and the small-sample adjustment.

How to calculate kurtosis by hand

To calculate kurtosis, compare the average fourth-power deviation with the squared variance. Five steps take you from raw data to the sample excess kurtosis that Excel and SPSS report:

  1. Find the mean x̄ of the n values.
  2. Square each deviation (x − x̄) and raise it to the fourth power, then add each column.
  3. Divide both sums by n to get m₂ and m₄, the second and fourth central moments.
  4. Compute g₂ = m₄ / m₂² − 3. This is the population excess kurtosis.
  5. Apply the small-sample correction G₂ = [(n + 1)g₂ + 6](n − 1) / [(n − 2)(n − 3)] to get the sample excess kurtosis.

Kurtosis formula

Central moments
m₂ = Σ(xᵢ − x̄)² / n, m₄ = Σ(xᵢ − x̄)⁴ / n
Raw (Pearson) kurtosis
b₂ = m₄ / m₂²
Population excess kurtosis
g₂ = m₄ / m₂² − 3
Sample excess kurtosis
G₂ = [(n + 1)g₂ + 6](n − 1) / [(n − 2)(n − 3)]
Standard error of kurtosis
SEK = 2 · SES · √[(n² − 1) / ((n − 3)(n + 5))]
Formula symbols
SymbolMeaning
m₂, m₄second and fourth central moments (divide by n)
nnumber of values
SESstandard error of skewness, √[6n(n − 1) / ((n − 2)(n + 1)(n + 3))]
3raw kurtosis of every normal distribution

Raw kurtosis = excess kurtosis + 3. If a source reports kurtosis near 3 for normal-looking data it is using raw kurtosis; if it reports values near 0 it is using excess kurtosis.

G₂ matches SciPy’s kurtosis(x, bias=False) and Excel’s KURT; g₂ matches SciPy’s default kurtosis(x).

Formulas follow the NIST/SEMATECH e-Handbook of Statistical Methods and Joanes and Gill (1998), “Comparing measures of sample skewness and kurtosis”. The tails-not-peaks reading follows Westfall (2014), “Kurtosis as Peakedness, 1905–2014. R.I.P.”.

Worked example

Worked example: machine cycle times

Problem. A machine’s cycle time is recorded 13 times: 52, 48, 53, 51, 64, 52, 50, 54, 52, 40, 53, 55, 51 seconds. Most cycles are tightly grouped, but two are unusual. Find the kurtosis.

  1. 01Mean: x̄ = 675 / 13 = 51.9231 seconds.
  2. 02Σ(x − x̄)² = 324.9231, so m₂ = 324.9231 / 13 = 24.9941.
  3. 03Σ(x − x̄)⁴ = 41,845.1525, so m₄ = 41,845.1525 / 13 = 3,218.8579.
  4. 04Raw kurtosis b₂ = 3,218.8579 / 24.9941² = 5.1526, so g₂ = 5.1526 − 3 = 2.1526.
  5. 05G₂ = (14 × 2.1526 + 6) × 12 / (11 × 10) = 3.9422. SEK = 1.1909, so z = 3.9422 / 1.1909 = 3.3103.

Answer. The sample excess kurtosis is G₂ ≈ 3.94: the cycle times are strongly leptokurtic, with far heavier tails than a normal distribution would have, and z ≈ 3.31 makes this statistically significant. The skewness is almost zero (0.0266), so the extremes occur on both sides: the 40- and 64-second cycles.

How to interpret kurtosis

Read the sign first, then the size, then the standard error. The bands below are the ones this calculator uses for its verdict. They are rules of thumb for G₂, not formal cut-offs.

Sample excess kurtosis G₂ShapeWhat it means for your data
Below −1PlatykurticLight tails; values spread evenly with few extremes, like a uniform distribution
−1 to −0.5Slightly platykurticSomewhat fewer extreme values than normal data
−0.5 to 0.5Close to mesokurticTail weight similar to a normal distribution
0.5 to 1Slightly leptokurticSomewhat more extreme values than normal data
Above 1LeptokurticHeavy tails; outliers are more likely than a normal model predicts

Is the kurtosis significant?

A G₂ of 1.5 means little from 12 values and a lot from 500. Divide G₂ by its standard error, SEK: if |z| = |G₂ / SEK| is above 1.96, the tail weight differs from normal at about the 5% level. SEK shrinks roughly like √(24 / n), so it is about 1.2 at n = 13, 0.83 at n = 30 and 0.22 at n = 500. With small samples, look at which values drive Σ(x − x̄)⁴; the calculator lists them when a few values dominate.

Skewness vs kurtosis

Skewness and kurtosis are the third and fourth standardized moments, and they are usually reported together to describe the shape of a distribution. To calculate kurtosis and skewness from the same data, find the mean and the central moments once, then use m₃ / m₂^1.5 for skewness and m₄ / m₂² − 3 for excess kurtosis. This page shows G₁ beside G₂; the Skewness Calculator gives the full skewness working, and the Descriptive Statistics Calculator reports both with the other summary statistics.

SkewnessKurtosis
What it measuresAsymmetry: is one tail longer?Tail weight: how prone to extreme values?
MomentThird, (x − x̄)³Fourth, (x − x̄)⁴
Normal distribution00 (excess) or 3 (raw)
SignPositive = longer right tailPositive = heavier tails than normal
Possible rangeAny real numberExcess ≥ −2, no upper limit
Excel functionSKEWKURT

Kurtosis of common distributions

These benchmark values help you place a result. Excess kurtosis can never be below −2, but it has no upper limit.

DistributionExcess kurtosisRaw kurtosisDescription
Two equally likely values (coin flip)−21Lowest possible; no tails at all
Uniform−1.21.8Platykurtic
Normal03Mesokurtic benchmark
Logistic1.24.2Mildly leptokurtic
Laplace (double exponential)36Leptokurtic
Exponential69Leptokurtic and skewed
Student’s t with 5 df69Heavy tails

Kurtosis measures tails, not peakedness

Many textbooks describe leptokurtic distributions as “sharply peaked” and platykurtic ones as “flat-topped”. That is misleading. Because each deviation is raised to the fourth power, values near the mean contribute almost nothing to m₄; the result is driven by the most extreme observations. Distributions can have a flat top and high kurtosis, or a sharp peak and low kurtosis.

A practical reading is: high kurtosis means a larger share of the variance comes from rare, extreme values. In the worked example the two outlying cycles (40 and 64 seconds) account for 99% of Σ(x − x̄)⁴.

Common use cases

  • Finance and risk: daily returns typically show positive excess kurtosis (fat tails), so normal-based risk models understate the chance of large losses.
  • Checking normality: together with skewness, kurtosis shows how far a sample departs from the normal shape assumed by t-tests and regression.
  • Process monitoring: heavy-tailed measurement errors mean more points beyond control limits than a normal model predicts.
  • Data screening: an unexpectedly large kurtosis often points to outliers or a mixture of two populations.

Assumptions and limitations

  • Kurtosis needs large samples. With n under about 30 the standard error is large, and one value can swing the estimate.
  • It is extremely sensitive to outliers. Check flagged values with the Lower and Upper Fence Calculator before interpreting it.
  • Different software reports raw kurtosis, population excess kurtosis or sample excess kurtosis. Compare like with like.
  • The z test uses a normal approximation that is poor for small samples. For a formal normality test, use the Shapiro–Wilk test or D’Agostino’s omnibus test.
  • The calculator works on raw values. For a grouped frequency table, enter each class midpoint repeated by its frequency; the result is an approximation because values within a class are treated as equal.

Frequently asked questions

How do I calculate kurtosis?

Find the mean, then the average squared deviation m₂ and the average fourth-power deviation m₄. Raw kurtosis is m₄ / m₂², and excess kurtosis is that value minus 3. For the sample excess kurtosis reported by Excel’s KURT, apply G₂ = [(n + 1)g₂ + 6](n − 1) / [(n − 2)(n − 3)]. Paste your data above to see each step with your numbers.

How do I calculate kurtosis and skewness?

Both come from the same central moments. Compute m₂, m₃ and m₄ (the average squared, cubed and fourth-power deviations from the mean). Skewness is m₃ / m₂^1.5 and excess kurtosis is m₄ / m₂² − 3. In Excel, use SKEW and KURT. This calculator reports both, and the Skewness Calculator shows the skewness steps.

Why do we calculate kurtosis?

Kurtosis tells you how often extreme values occur compared with a normal distribution. It is used to check the normality assumption behind t-tests and regression, to warn that risk models will understate large losses, and to flag outliers or mixed populations in a dataset.

What is the difference between kurtosis and excess kurtosis?

Raw (Pearson) kurtosis is m₄ / m₂², which equals 3 for every normal distribution. Excess kurtosis subtracts 3 so the normal benchmark becomes 0. Positive excess kurtosis means heavier tails than normal; negative means lighter tails.

What does high kurtosis mean?

High (positive excess) kurtosis means the data produce extreme values more often than a normal distribution with the same standard deviation would. These distributions are called leptokurtic. Financial returns and data contaminated by outliers are common examples.

What is an acceptable kurtosis for normality?

Rules of thumb vary. Excess kurtosis between −1 and 1 is usually treated as close to normal, and many applied researchers accept values between −2 and 2. A more principled check divides G₂ by its standard error; |z| above 1.96 suggests a significant departure at the 5% level.

Why does Excel’s KURT give a different value from SciPy?

Excel’s KURT returns the bias-adjusted sample excess kurtosis G₂, while SciPy’s kurtosis() defaults to the population version g₂. Call scipy.stats.kurtosis(x, bias=False) to match Excel. Both are excess kurtosis; add 3 for raw kurtosis.

Can kurtosis be negative?

Excess kurtosis can be negative, down to a minimum of −2. Negative values describe platykurtic distributions with light tails, such as the uniform distribution (−1.2). Raw kurtosis is always at least 1, so it is never negative.

What do leptokurtic, mesokurtic and platykurtic mean?

They describe tail weight relative to the normal distribution. Mesokurtic distributions have excess kurtosis near 0, like the normal. Leptokurtic distributions have positive excess kurtosis and heavier tails. Platykurtic distributions have negative excess kurtosis and lighter tails.

Cite this page

Statculator. (2026, November 14). Kurtosis Calculator. Retrieved November 14, 2026, from https://statculator.com/descriptive-statistics/kurtosis-calculator/