Skip to content
Statculator

Statistical table

Z Table (Standard Normal Distribution Table)

Z table of cumulative probabilities for negative and positive z-scores from −3.99 to 3.99, with a two-way lookup, critical values, examples and a free PDF.

Updated

Jump to table Download PDF

Quick answer

A z table (standard normal table) gives the cumulative probability P(Z ≤ z): the area under the standard normal curve to the left of a z-score. Find the row for the z-score’s sign, units digit and first decimal, then the column for its second decimal; the cell where they meet is the area. For example, P(Z ≤ 1.96) = 0.9750, so 97.5% of values lie below z = 1.96 and 2.5% lie above it.

Look up any z-score or area

The matching cell is highlighted in the table below.

P(Z ≤ 1.96)

0.975002

Percentile ≈ 97.5th. Table cell: 0.9750.

P(Z ≥ z)
0.024998
P(−|z| ≤ Z ≤ |z|)
0.950004
Negative z-score table: P(Z ≤ z) for z from −3.99 to 0Row = z to one decimal, column = second decimal (subtract).
z.00.01.02.03.04.05.06.07.08.09
−3.90.00000.00000.00000.00000.00000.00000.00000.00000.00000.0000
−3.80.00010.00010.00010.00010.00010.00010.00010.00010.00010.0001
−3.70.00010.00010.00010.00010.00010.00010.00010.00010.00010.0001
−3.60.00020.00020.00010.00010.00010.00010.00010.00010.00010.0001
−3.50.00020.00020.00020.00020.00020.00020.00020.00020.00020.0002
−3.40.00030.00030.00030.00030.00030.00030.00030.00030.00030.0002
−3.30.00050.00050.00050.00040.00040.00040.00040.00040.00040.0003
−3.20.00070.00070.00060.00060.00060.00060.00060.00050.00050.0005
−3.10.00100.00090.00090.00090.00080.00080.00080.00080.00070.0007
−3.00.00130.00130.00130.00120.00120.00110.00110.00110.00100.0010
−2.90.00190.00180.00180.00170.00160.00160.00150.00150.00140.0014
−2.80.00260.00250.00240.00230.00230.00220.00210.00210.00200.0019
−2.70.00350.00340.00330.00320.00310.00300.00290.00280.00270.0026
−2.60.00470.00450.00440.00430.00410.00400.00390.00380.00370.0036
−2.50.00620.00600.00590.00570.00550.00540.00520.00510.00490.0048
−2.40.00820.00800.00780.00750.00730.00710.00690.00680.00660.0064
−2.30.01070.01040.01020.00990.00960.00940.00910.00890.00870.0084
−2.20.01390.01360.01320.01290.01250.01220.01190.01160.01130.0110
−2.10.01790.01740.01700.01660.01620.01580.01540.01500.01460.0143
−2.00.02280.02220.02170.02120.02070.02020.01970.01920.01880.0183
−1.90.02870.02810.02740.02680.02620.02560.02500.02440.02390.0233
−1.80.03590.03510.03440.03360.03290.03220.03140.03070.03010.0294
−1.70.04460.04360.04270.04180.04090.04010.03920.03840.03750.0367
−1.60.05480.05370.05260.05160.05050.04950.04850.04750.04650.0455
−1.50.06680.06550.06430.06300.06180.06060.05940.05820.05710.0559
−1.40.08080.07930.07780.07640.07490.07350.07210.07080.06940.0681
−1.30.09680.09510.09340.09180.09010.08850.08690.08530.08380.0823
−1.20.11510.11310.11120.10930.10750.10560.10380.10200.10030.0985
−1.10.13570.13350.13140.12920.12710.12510.12300.12100.11900.1170
−1.00.15870.15620.15390.15150.14920.14690.14460.14230.14010.1379
−0.90.18410.18140.17880.17620.17360.17110.16850.16600.16350.1611
−0.80.21190.20900.20610.20330.20050.19770.19490.19220.18940.1867
−0.70.24200.23890.23580.23270.22960.22660.22360.22060.21770.2148
−0.60.27430.27090.26760.26430.26110.25780.25460.25140.24830.2451
−0.50.30850.30500.30150.29810.29460.29120.28770.28430.28100.2776
−0.40.34460.34090.33720.33360.33000.32640.32280.31920.31560.3121
−0.30.38210.37830.37450.37070.36690.36320.35940.35570.35200.3483
−0.20.42070.41680.41290.40900.40520.40130.39740.39360.38970.3859
−0.10.46020.45620.45220.44830.44430.44040.43640.43250.42860.4247
−0.00.50000.49600.49200.48800.48400.48010.47610.47210.46810.4641
Positive z-score table: P(Z ≤ z) for z from 0 to 3.99Row = z to one decimal, column = second decimal (add).
z.00.01.02.03.04.05.06.07.08.09
0.00.50000.50400.50800.51200.51600.51990.52390.52790.53190.5359
0.10.53980.54380.54780.55170.55570.55960.56360.56750.57140.5753
0.20.57930.58320.58710.59100.59480.59870.60260.60640.61030.6141
0.30.61790.62170.62550.62930.63310.63680.64060.64430.64800.6517
0.40.65540.65910.66280.66640.67000.67360.67720.68080.68440.6879
0.50.69150.69500.69850.70190.70540.70880.71230.71570.71900.7224
0.60.72570.72910.73240.73570.73890.74220.74540.74860.75170.7549
0.70.75800.76110.76420.76730.77040.77340.77640.77940.78230.7852
0.80.78810.79100.79390.79670.79950.80230.80510.80780.81060.8133
0.90.81590.81860.82120.82380.82640.82890.83150.83400.83650.8389
1.00.84130.84380.84610.84850.85080.85310.85540.85770.85990.8621
1.10.86430.86650.86860.87080.87290.87490.87700.87900.88100.8830
1.20.88490.88690.88880.89070.89250.89440.89620.89800.89970.9015
1.30.90320.90490.90660.90820.90990.91150.91310.91470.91620.9177
1.40.91920.92070.92220.92360.92510.92650.92790.92920.93060.9319
1.50.93320.93450.93570.93700.93820.93940.94060.94180.94290.9441
1.60.94520.94630.94740.94840.94950.95050.95150.95250.95350.9545
1.70.95540.95640.95730.95820.95910.95990.96080.96160.96250.9633
1.80.96410.96490.96560.96640.96710.96780.96860.96930.96990.9706
1.90.97130.97190.97260.97320.97380.97440.97500.97560.97610.9767
2.00.97720.97780.97830.97880.97930.97980.98030.98080.98120.9817
2.10.98210.98260.98300.98340.98380.98420.98460.98500.98540.9857
2.20.98610.98640.98680.98710.98750.98780.98810.98840.98870.9890
2.30.98930.98960.98980.99010.99040.99060.99090.99110.99130.9916
2.40.99180.99200.99220.99250.99270.99290.99310.99320.99340.9936
2.50.99380.99400.99410.99430.99450.99460.99480.99490.99510.9952
2.60.99530.99550.99560.99570.99590.99600.99610.99620.99630.9964
2.70.99650.99660.99670.99680.99690.99700.99710.99720.99730.9974
2.80.99740.99750.99760.99770.99770.99780.99790.99790.99800.9981
2.90.99810.99820.99820.99830.99840.99840.99850.99850.99860.9986
3.00.99870.99870.99870.99880.99880.99890.99890.99890.99900.9990
3.10.99900.99910.99910.99910.99920.99920.99920.99920.99930.9993
3.20.99930.99930.99940.99940.99940.99940.99940.99950.99950.9995
3.30.99950.99950.99950.99960.99960.99960.99960.99960.99960.9997
3.40.99970.99970.99970.99970.99970.99970.99970.99970.99970.9998
3.50.99980.99980.99980.99980.99980.99980.99980.99980.99980.9998
3.60.99980.99980.99990.99990.99990.99990.99990.99990.99990.9999
3.70.99990.99990.99990.99990.99990.99990.99990.99990.99990.9999
3.80.99990.99990.99990.99990.99990.99990.99990.99990.99990.9999
3.91.00001.00001.00001.00001.00001.00001.00001.00001.00001.0000

What is a z table?

The standard normal distribution is the normal distribution with mean 0 and standard deviation 1. Any normally distributed value x converts to it through the z-score z = (x − μ) / σ, which counts how many standard deviations x lies above or below the mean. Because every normal distribution maps onto this one curve, a single table of areas answers probability questions about heights, test scores, measurement errors and any other approximately normal quantity.

The same table goes by many names: the z-score table, the standard normal distribution table, the normal distribution table, the unit normal table, the z score chart, the cumulative normal distribution (normal CDF) table or Φ(z) table, and, in many textbooks, Table A or Table A-2. Older books call these tables of the normal distribution "normal curve tables" or Gaussian distribution tables. They all list the same numbers, although some print only the positive half or measure the area from 0 to z instead of from the left.

This z table is cumulative from the left: every cell is P(Z ≤ z), the area to the left of z. It comes in two parts, a negative z-score table down to −3.99 and a positive z-score table up to 3.99, so the full table covers z = −3.99 to 3.99. Rows step by 0.1, and the columns add the second decimal place, from .00 to .09. Right-tail and between-value areas come from combining cells, as shown below, and the lookup above works in both directions: from z to an area, or from an area back to z.

How to read the z table

  1. Round your z-score to two decimal places, for example z = 1.96 or z = −1.25.
  2. Pick the table: the negative z-table for z below 0, the positive z-table for z of 0 or more.
  3. Find the row for the sign, units digit and first decimal: row 1.9 for z = 1.96, row −1.2 for z = −1.25.
  4. Move across to the column for the second decimal: column .06 for 1.96, column .05 for −1.25.
  5. Read the cell. It is P(Z ≤ z), the area to the left of z. For the area to the right, subtract it from 1; for the area between two z-scores, subtract the smaller cumulative area from the larger.

Examples

Area to the left of a negative z-score

Problem. Find P(Z ≤ −1.25).

  1. 01Use the negative z-table.
  2. 02Go to row −1.2 and column .05.
  3. 03The cell reads 0.1056.

Answer. P(Z ≤ −1.25) = 0.1056, so about 10.56% of the distribution lies below z = −1.25.

Area to the right of a z-score

Problem. An exam score has a z-score of 2.33. What proportion of scores are higher?

  1. 01Positive z-table, row 2.3, column .03: P(Z ≤ 2.33) = 0.9901.
  2. 02Right-tail area: 1 − 0.9901 = 0.0099.

Answer. About 0.99% of scores are higher, so this score sits at roughly the 99th percentile.

Area between two z-scores

Problem. Find P(−1.00 ≤ Z ≤ 1.50).

  1. 01P(Z ≤ 1.50) = 0.9332 (positive table, row 1.5, column .00). A five-decimal table prints 0.93319, so the right tail is 1 − 0.93319 = 0.06681.
  2. 02P(Z ≤ −1.00) = 0.1587 (negative table, row −1.0, column .00).
  3. 03Subtract the smaller area from the larger: 0.9332 − 0.1587 = 0.7745.

Answer. P(−1.00 ≤ Z ≤ 1.50) = 0.7745: about 77.5% of values fall between these two z-scores.

From a raw score to a probability

Problem. IQ scores are approximately normal with μ = 100 and σ = 15. What share of people score 127 or less?

  1. 01Standardize: z = (127 − 100) / 15 = 1.80.
  2. 02Positive table, row 1.8, column .00: 0.9641.

Answer. About 96.4% of people score 127 or less, and about 3.6% score higher.

Negative vs positive z-score table

The table is split in two because it is cumulative from the left. Negative z-scores have areas below 0.5, positive z-scores have areas above 0.5, and P(Z ≤ 0) = 0.5000 exactly.

Symmetry links the two halves: P(Z ≤ −z) = 1 − P(Z ≤ z). For example, P(Z ≤ −1.96) = 1 − 0.9750 = 0.0250. If a textbook prints only the positive z table, this identity recovers the negative one.

Critical z values for common confidence levels

A critical value z* is read from the table in reverse: find the area in the body, then read z from the row and column. A two-sided interval at confidence level C leaves (1 − C) / 2 in each tail, so z* has a left area of 1 − (1 − C) / 2. For 95% that area is 0.9750, which sits exactly at z = 1.96. The notation z₀.₀₂₅ means the z with 0.025 to its right, which is the same 1.96.

Use these multipliers in the Confidence Interval Calculator, the Proportion Confidence Interval Calculator or the Margin of Error Calculator. The Z Critical Value Calculator gives z* for any level.

Confidence levelTwo-tailed αTwo-tailed z* (±)One-tailed z (α in one tail)
80%0.201.2820.842
90%0.101.6451.282
95%0.051.9601.645
98%0.022.3262.054
99%0.012.5762.326
99.5%0.0052.8072.576
99.9%0.0013.2913.090

Finding any area from the z table

For a reverse lookup, where you know the area and need z, search the body of the table for the area. The 85th percentile falls between 0.8485 (z = 1.03) and 0.8508 (z = 1.04); 0.8508 is closer, so z ≈ 1.04. The exact value is 1.0364, which you can get from the lookup above with the direction set to “Area → z”, or from the Percentile to Z-Score Calculator.

You wantHow to get itExample
Left tail, P(Z ≤ z)Read the cell directlyP(Z ≤ 0.84) = 0.7995
Right tail, P(Z ≥ z)1 − P(Z ≤ z)P(Z ≥ 0.84) = 1 − 0.7995 = 0.2005
Between, P(a ≤ Z ≤ b)P(Z ≤ b) − P(Z ≤ a)P(−0.67 ≤ Z ≤ 0.67) = 0.7486 − 0.2514 = 0.4972
Both tails beyond ±z2 × P(Z ≤ −|z|)2 × P(Z ≤ −1.96) = 2 × 0.0250 = 0.0500
z for a given left areaFind the closest cell, then read its row and columnArea 0.8500 gives z ≈ 1.04

Common errors when reading a z table

  • Treating the cell as a right-tail area. In this table the cell is the area to the left. For P(Z > 1.25) the answer is 1 − 0.8944 = 0.1056, not 0.8944.
  • Mixing up table types. Some books print the area from 0 to z (0.3944 for z = 1.25) instead of the cumulative area (0.8944). Add 0.5 to convert a positive “0 to z” value into a cumulative one.
  • Reading the wrong column for a negative z. For z = −1.25, go to row −1.2 and column .05; the column is the next digit of the same negative number.
  • Forgetting to standardize. The table only works for z, so convert x with z = (x − μ) / σ first.
  • Using one tail for a two-sided question. A two-tailed p-value or a 95% interval needs α/2 in each tail, which is why z* = 1.96 rather than 1.645.

Z table practice questions

Try each one with the table, then check your answer with the lookup above.

  • Find P(Z ≤ −1.67). Answer: row −1.6, column .07: 0.0475.
  • Find P(Z > 2.05). Answer: 1 − 0.9798 = 0.0202.
  • Find P(−0.25 ≤ Z ≤ 0.75). Answer: 0.7734 − 0.4013 = 0.3721.
  • Which z-score marks the 90th percentile? Answer: the closest cell to 0.9000 is 0.8997 at z = 1.28 (exact 1.2816).
  • Heights have μ = 170 cm and σ = 8 cm. What share is shorter than 158 cm? Answer: z = −1.50, so 0.0668, about 6.7%.

When to use a calculator instead

A printed z table rounds z to two decimals and areas to four, which is enough for homework and quick checks. Use an exact tool when z has more decimal places (for z = −1.674, the table gives 0.0475 at −1.67 while the exact area is 0.04707), when you need tiny tail areas (below about z = −3.5 a four-decimal table can show only 0.0002, 0.0001 or 0.0000), or when your variable is not yet standardized.

Print or download the z table

Use Download PDF at the top of the page for a printable z table: it opens Table 1 of the free Statculator statistical tables PDF, with the negative z-score table on one page and the positive z-score table on the next. Print / save as PDF prints this page with both tables.

Every value is computed from the exact standard normal CDF, Φ(z), and rounded to four decimals. You can check any entry against the NIST/SEMATECH e-Handbook table of the standard normal CDF, which lists the area from 0 to z (add 0.5 for positive z); its normal distribution page gives the formulas. In software, Excel’s NORM.S.DIST(z, TRUE) and R’s pnorm(z) return the same left-tail area, and NORM.S.INV(p) or qnorm(p) go from an area back to z.

Frequently asked questions

How do you read a z table?

Split the z-score into its first decimal (the row) and its second decimal (the column), then read the cell where they meet. In a cumulative z table that cell is P(Z ≤ z), the area to the left of z. For z = 1.96, row 1.9 and column .06 give 0.9750.

What is the z-score for 95% confidence?

For a two-sided 95% confidence interval, z = 1.96, because P(Z ≤ 1.96) = 0.9750 leaves 2.5% in each tail. For a one-sided 95% bound, z = 1.645, which lies halfway between the cells for 1.64 (0.9495) and 1.65 (0.9505).

What is the z value for 0.025 and for 0.05?

z₀.₀₂₅ = 1.96: the z with an area of 0.025 to its right (and −1.96 has 0.025 to its left). z₀.₀₅ = 1.645, the one-tailed critical value at α = 0.05. These are the two most common critical values in the table.

How do I find the area to the right of a z-score?

Subtract the table value from 1: P(Z > z) = 1 − P(Z ≤ z). For example, P(Z > 1.50) = 1 − 0.9332 = 0.0668. By symmetry this also equals P(Z < −1.50), which you can read directly from the negative table.

Can I use the z table for any normal distribution?

Yes, after standardizing. Convert x to z = (x − μ) / σ, then look up z. For example, a score of 115 on a scale with μ = 100 and σ = 15 has z = 1.00, so P(X ≤ 115) = 0.8413.

What is Table A in statistics?

Table A (Table A-2 in some textbooks) is the usual name for the standard normal table printed at the back of a statistics book. It is the same z table shown here: cumulative areas P(Z ≤ z) for negative and positive z-scores.

Why does the z table stop at ±3.99?

Almost all of the area lies inside that range: P(Z ≤ −3.99) is about 0.00003, which rounds to 0.0000 at four decimals. For more extreme z-scores, use the exact lookup or a calculator, which report tail areas to many more digits.

What is the difference between a z table and a t table?

A z table gives areas under the standard normal curve and is used when the population standard deviation is known, or for proportions in large samples. A t table gives critical values of Student’s t distribution, which has heavier tails and depends on degrees of freedom; it is used when σ is estimated from the sample. As the degrees of freedom grow, t values approach z values.

Cite this page

Statculator. (2026, November 14). Z Table (Standard Normal Distribution Table). Retrieved November 14, 2026, from https://statculator.com/tables/z-table/

Values are computed from the exact distribution functions used by Statculator’s calculators (see methodology).