Skip to content
Statculator

Statistical table

T-Table (Student’s t Distribution Table)

T table of one- and two-tailed critical values for df 1–1000 and ∞, with confidence levels, an exact lookup and p-value, worked examples and a free PDF.

Updated

Jump to table Download PDF

Quick answer

A t table lists critical values of Student’s t distribution by degrees of freedom (rows) and significance level α (columns). Find the row for your df, choose the one-tailed or two-tailed α column, and read the value where they meet. For example, a two-tailed test at α = 0.05 with df = 15 has critical values ±2.131. Reject H₀ when your t statistic falls beyond the critical value.

Find any t critical value

Decimals allowed (e.g. Welch df).

Shows the exact p-value and the decision.

Two-tailed t critical value, df = 15, α = 0.05

±2.1314

Confidence level 95%.

Two-tailed t-table: critical values ±t for total tail area αValues rounded to 3 decimals; the last row equals the standard normal z.
Confidence50%80%90%95%98%99%99.8%99.9%
dfα = 0.5α = 0.2α = 0.1α = 0.05α = 0.02α = 0.01α = 0.002α = 0.001
11.0003.0786.31412.70631.82163.657318.309636.619
20.8161.8862.9204.3036.9659.92522.32731.599
30.7651.6382.3533.1824.5415.84110.21512.924
40.7411.5332.1322.7763.7474.6047.1738.610
50.7271.4762.0152.5713.3654.0325.8936.869
60.7181.4401.9432.4473.1433.7075.2085.959
70.7111.4151.8952.3652.9983.4994.7855.408
80.7061.3971.8602.3062.8963.3554.5015.041
90.7031.3831.8332.2622.8213.2504.2974.781
100.7001.3721.8122.2282.7643.1694.1444.587
110.6971.3631.7962.2012.7183.1064.0254.437
120.6951.3561.7822.1792.6813.0553.9304.318
130.6941.3501.7712.1602.6503.0123.8524.221
140.6921.3451.7612.1452.6242.9773.7874.140
150.6911.3411.7532.1312.6022.9473.7334.073
160.6901.3371.7462.1202.5832.9213.6864.015
170.6891.3331.7402.1102.5672.8983.6463.965
180.6881.3301.7342.1012.5522.8783.6103.922
190.6881.3281.7292.0932.5392.8613.5793.883
200.6871.3251.7252.0862.5282.8453.5523.850
210.6861.3231.7212.0802.5182.8313.5273.819
220.6861.3211.7172.0742.5082.8193.5053.792
230.6851.3191.7142.0692.5002.8073.4853.768
240.6851.3181.7112.0642.4922.7973.4673.745
250.6841.3161.7082.0602.4852.7873.4503.725
260.6841.3151.7062.0562.4792.7793.4353.707
270.6841.3141.7032.0522.4732.7713.4213.690
280.6831.3131.7012.0482.4672.7633.4083.674
290.6831.3111.6992.0452.4622.7563.3963.659
300.6831.3101.6972.0422.4572.7503.3853.646
400.6811.3031.6842.0212.4232.7043.3073.551
500.6791.2991.6762.0092.4032.6783.2613.496
600.6791.2961.6712.0002.3902.6603.2323.460
800.6781.2921.6641.9902.3742.6393.1953.416
1000.6771.2901.6601.9842.3642.6263.1743.390
1200.6771.2891.6581.9802.3582.6173.1603.373
10000.6751.2821.6461.9622.3302.5813.0983.300
∞ (z)0.6741.2821.6451.9602.3262.5763.0903.291

What is a t-table?

Student’s t distribution is the sampling distribution that applies when a mean is standardized with the sample standard deviation s instead of the population σ. It is bell-shaped and symmetric like the normal curve but has heavier tails, and its exact shape depends on the degrees of freedom (df). Small samples have few degrees of freedom and fatter tails, so they need larger critical values to reach the same significance level. The same table is known as the t distribution table, the t-score table, the t chart, the table of t statistics, the t critical value table or, in AP Statistics, the t-star table (t* is the critical value), and it is sometimes searched for simply as "ttable".

Each cell of this table is the critical value t_c with an upper-tail area of α, so P(T ≥ t_c) = α for a one-tailed test. Rows cover df 1 to 30, then 40, 50, 60, 80, 100, 120, 1000 and ∞. Columns cover one-tailed α = 0.25, 0.10, 0.05, 0.025, 0.01, 0.005, 0.001 and 0.0005; the two-tailed view labels the same columns 0.50 to 0.001 and shows the matching confidence level, from 50% to 99.9%. For df values that are not listed, use the exact lookup.

How to read the t-table

  1. Calculate the degrees of freedom for your procedure, for example df = n − 1 for a one-sample or paired t-test.
  2. Decide whether the test is one-tailed or two-tailed, and switch the table to the matching view.
  3. Find the column for your significance level α. For a confidence interval, use the two-tailed column with α = 1 − confidence level, for example 0.05 for 95%.
  4. Read across the df row to that column to get the critical value t_c. For a two-tailed test, the rejection region is t ≤ −t_c or t ≥ t_c.
  5. If your df is not listed, use the next smaller df in the table, which is slightly conservative, or the exact lookup.

Examples

Two-tailed test

Problem. A one-sample t-test uses n = 16 observations at α = 0.05, two-tailed. What is the critical value?

  1. 01df = n − 1 = 15.
  2. 02Two-tailed α = 0.05 is the same column as one-tailed α = 0.025.
  3. 03Row 15 in that column reads 2.131.

Answer. Reject H₀ if t ≤ −2.131 or t ≥ 2.131.

One-tailed test

Problem. A pooled two-sample t-test has n₁ = 12 and n₂ = 14, H₁: μ₁ > μ₂ and α = 0.05. Find the critical value.

  1. 01df = n₁ + n₂ − 2 = 24.
  2. 02Use the one-tailed α = 0.05 column, row 24: 1.711.

Answer. Reject H₀ if t ≥ 1.711.

Confidence interval multiplier

Problem. Find the t multiplier for a 95% confidence interval for a mean based on n = 20 observations.

  1. 01df = 20 − 1 = 19.
  2. 02A 95% interval leaves 2.5% in each tail, so use two-tailed α = 0.05 (one-tailed 0.025).
  3. 03Row 19 reads 2.093.

Answer. The interval is x̄ ± 2.093 · s / √20.

One-tailed vs two-tailed t table and confidence levels

A one-tailed (one-sided) test puts all of α in one tail. A two-tailed (two-sided) test splits α between both tails, so its critical value equals the one-tailed critical value at α/2. That is why one set of numbers serves both views, with two sets of column labels. The same two-tailed column gives the t multiplier for a confidence interval: 95% confidence uses two-tailed α = 0.05. The bottom row, df = ∞, matches the standard normal critical values, which shows how the t distribution approaches the normal as df grows.

One-tailed αTwo-tailed αConfidence levelt_c at df = 10t_c at df = ∞
0.250.5050%0.7000.674
0.100.2080%1.3721.282
0.050.1090%1.8121.645
0.0250.0595%2.2281.960
0.010.0298%2.7642.326
0.0050.0199%3.1692.576
0.0010.00299.8%4.1443.090
0.00050.00199.9%4.5873.291

Degrees of freedom for common t procedures

Welch’s test usually produces a fractional df. Either round it down to use the table or use the exact lookup, which accepts fractional values. The Degrees of Freedom Calculator works out df for each procedure below.

ProcedureDegrees of freedom
One-sample t-test or t intervaln − 1
Paired t-testn − 1, where n is the number of pairs
Pooled two-sample t-testn₁ + n₂ − 2
Welch’s t-testWelch–Satterthwaite df, usually not a whole number
Slope in simple linear regressionn − 2
Test of a Pearson correlationn − 2

When your df is not in the table

Above df = 30 the table lists only selected rows. Using the next smaller listed df gives a slightly larger critical value, so the test becomes a little conservative. For df = 45 at two-tailed α = 0.05, the df = 40 row gives 2.021, while the exact value is 2.014. For df = 49 at one-tailed α = 0.005, the df = 40 row gives 2.704, while the exact value is 2.680.

For an exact critical value at any df or α, use the lookup on this page or the T Critical Value Calculator. To go the other way, from a t statistic to a p-value, use the P-Value from t Calculator.

Finding a p-value with the t table

A t table gives critical values, not p-values, but it can bracket the p-value. Go to the row for your df, find the two columns whose values bracket |t|, and read their α labels: the p-value lies between them. Use the two-tailed labels for a two-tailed test.

With df = 15 and t = 2.5, the row reads 2.131 at two-tailed α = 0.05 and 2.602 at two-tailed α = 0.02, so 0.02 < p < 0.05. The exact two-tailed p-value is 0.0245. Enter your t statistic in the lookup above to get the exact p-value and the decision.

t table vs z table vs chi-square table

All three are tables of critical values, but each belongs to a different test statistic. Pick the table that matches the statistic your test produces.

TableStatisticUse it when
t tabletTesting or estimating a mean (or a difference of means, a regression slope or a correlation) with σ estimated from the sample
z-tablezσ is known, testing a proportion with a large sample, or df is large enough that t ≈ z
Chi-square tableχ²Goodness-of-fit and independence tests on counts, or a test or interval for one variance

Common errors when reading a t table

  • Using the one-tailed column for a two-tailed test. At df = 15 and α = 0.05 this gives 1.753 instead of 2.131 and doubles the real Type I error rate.
  • Using n instead of df. For a one-sample test with n = 16, the row is 15, not 16.
  • Rounding df up. If df = 45 is not listed, use the df = 40 row (or the exact value), not df = 50, which gives a critical value that is too small.
  • Using z when the sample is small. With df = 10, the 95% multiplier is 2.228, not 1.960; the z value gives an interval that is too narrow.
  • Comparing a negative t with a positive critical value. For a two-tailed test compare |t|; for a left-tailed test compare t with −t_c.

t table practice problems

Try each one with the table, then check your answer with the lookup.

  • A paired t-test has 9 pairs, two-tailed α = 0.05. Critical value? Answer: df = 8, ±2.306.
  • What is the t multiplier for a 99% confidence interval with n = 25? Answer: df = 24, two-tailed α = 0.01, 2.797.
  • A left-tailed one-sample test has n = 13 and α = 0.01. Critical value? Answer: df = 12, reject H₀ if t ≤ −2.681.
  • A right-tailed test gives t = 1.90 with df = 22. Is it significant at α = 0.05? Answer: yes, 1.90 > 1.717; the row brackets p between 0.025 and 0.05 (exact p = 0.0353).

Print or download the t table

Use Download PDF at the top of the page for a printable t table: it opens Table 2 of the free Statculator statistical tables PDF, with the same 40 rows and both one-tailed and two-tailed α labels. Print / save as PDF prints this page, including the view you have selected.

Every value is computed from the exact Student t inverse CDF and rounded to three decimals, so it can differ from older printed tables in the last digit. You can check any entry against the NIST/SEMATECH e-Handbook table of critical values of the t distribution; its t distribution page gives the formulas. In software, Excel’s T.INV.2T(α, df) and R’s qt(1 − α/2, df) return the two-tailed value.

Frequently asked questions

How do I find the degrees of freedom for a t table?

For a one-sample or paired t-test, df = n − 1, where n is the number of observations or pairs. For a pooled two-sample t-test, df = n₁ + n₂ − 2. Welch’s t-test uses the Welch–Satterthwaite formula, which usually gives a non-integer df.

What is the t critical value for a 95% confidence interval?

It depends on the degrees of freedom. In the two-tailed α = 0.05 column, it is 2.228 for df = 10, 2.093 for df = 19, 2.045 for df = 29 and 1.960 for df = ∞. Smaller samples need larger multipliers.

Why are t critical values larger than z critical values?

Because s is estimated from the sample, the t statistic varies more than z, and its distribution has heavier tails. A larger cutoff is needed to keep the same α. The difference shrinks as df increases, and at df = ∞ the values match the z-table.

What if my t statistic is negative?

The t distribution is symmetric, so the table lists only positive critical values. For a two-tailed test compare |t| with the critical value; for a left-tailed test, reject H₀ if t is less than or equal to the negative of the tabled value.

Can I get a p-value from a t table?

Only approximately. Find where |t| falls between two columns in its df row; the p-value lies between those columns’ α values. With df = 15, t = 2.5 falls between 2.131 (two-tailed 0.05) and 2.602 (two-tailed 0.02), so 0.02 < p < 0.05. The P-Value from t Calculator gives the exact value, 0.0245.

What is t* in a t table?

t* (t-star) is the critical value used as the multiplier in a t confidence interval, x̄ ± t* · s/√n. It is read from the two-tailed column for your confidence level, for example t* = 2.093 for 95% confidence with df = 19.

Cite this page

Statculator. (2026, November 14). T-Table (Student’s t Distribution Table). Retrieved November 14, 2026, from https://statculator.com/tables/t-table/

Values are computed from the exact distribution functions used by Statculator’s calculators (see methodology).