Skip to content
Statculator

Statistical table

F-Table (F Distribution Table)

F distribution table of critical values for α = 0.10, 0.05, 0.025 and 0.01 by numerator and denominator df, with an exact lookup, ANOVA examples and a free PDF.

Updated

Jump to table Download PDF

Quick answer

An F table gives upper-tail critical values of the F distribution for a chosen α, with the numerator degrees of freedom df₁ across the columns and the denominator degrees of freedom df₂ down the rows. Pick the table for your α, find the cell for (df₁, df₂), and reject H₀ if your F statistic is larger. For α = 0.05, df₁ = 3 and df₂ = 20, the critical value is 3.098.

Find any F critical value

Shows the right-tail p-value.

Upper F critical value, α = 0.05

3.0984

F(0.05; 3, 20), area α to the right.

F table for α = 0.05: upper critical values F(0.05; df₁, df₂)Columns: numerator df₁. Rows: denominator df₂. Rounded to 3 decimals.
df₂ / df₁1234567891012152024304060120∞
1161.448199.500215.707224.583230.162233.986236.768238.883240.543241.882243.906245.950248.013249.052250.095251.143252.196253.253254.314
218.51319.00019.16419.24719.29619.33019.35319.37119.38519.39619.41319.42919.44619.45419.46219.47119.47919.48719.496
310.1289.5529.2779.1179.0138.9418.8878.8458.8128.7868.7458.7038.6608.6398.6178.5948.5728.5498.526
47.7096.9446.5916.3886.2566.1636.0946.0415.9995.9645.9125.8585.8035.7745.7465.7175.6885.6585.628
56.6085.7865.4095.1925.0504.9504.8764.8184.7724.7354.6784.6194.5584.5274.4964.4644.4314.3984.365
65.9875.1434.7574.5344.3874.2844.2074.1474.0994.0604.0003.9383.8743.8413.8083.7743.7403.7053.669
75.5914.7374.3474.1203.9723.8663.7873.7263.6773.6373.5753.5113.4453.4103.3763.3403.3043.2673.230
85.3184.4594.0663.8383.6873.5813.5003.4383.3883.3473.2843.2183.1503.1153.0793.0433.0052.9672.928
95.1174.2563.8633.6333.4823.3743.2933.2303.1793.1373.0733.0062.9362.9002.8642.8262.7872.7482.707
104.9654.1033.7083.4783.3263.2173.1353.0723.0202.9782.9132.8452.7742.7372.7002.6612.6212.5802.538
114.8443.9823.5873.3573.2043.0953.0122.9482.8962.8542.7882.7192.6462.6092.5702.5312.4902.4482.404
124.7473.8853.4903.2593.1062.9962.9132.8492.7962.7532.6872.6172.5442.5052.4662.4262.3842.3412.296
134.6673.8063.4113.1793.0252.9152.8322.7672.7142.6712.6042.5332.4592.4202.3802.3392.2972.2522.206
144.6003.7393.3443.1122.9582.8482.7642.6992.6462.6022.5342.4632.3882.3492.3082.2662.2232.1782.131
154.5433.6823.2873.0562.9012.7902.7072.6412.5882.5442.4752.4032.3282.2882.2472.2042.1602.1142.066
164.4943.6343.2393.0072.8522.7412.6572.5912.5382.4942.4252.3522.2762.2352.1942.1512.1062.0592.010
174.4513.5923.1972.9652.8102.6992.6142.5482.4942.4502.3812.3082.2302.1902.1482.1042.0582.0111.960
184.4143.5553.1602.9282.7732.6612.5772.5102.4562.4122.3422.2692.1912.1502.1072.0632.0171.9681.917
194.3813.5223.1272.8952.7402.6282.5442.4772.4232.3782.3082.2342.1552.1142.0712.0261.9801.9301.878
204.3513.4933.0982.8662.7112.5992.5142.4472.3932.3482.2782.2032.1242.0822.0391.9941.9461.8961.843
214.3253.4673.0722.8402.6852.5732.4882.4202.3662.3212.2502.1762.0962.0542.0101.9651.9161.8661.812
224.3013.4433.0492.8172.6612.5492.4642.3972.3422.2972.2262.1512.0712.0281.9841.9381.8891.8381.783
234.2793.4223.0282.7962.6402.5282.4422.3752.3202.2752.2042.1282.0482.0051.9611.9141.8651.8131.757
244.2603.4033.0092.7762.6212.5082.4232.3552.3002.2552.1832.1082.0271.9841.9391.8921.8421.7901.733
254.2423.3852.9912.7592.6032.4902.4052.3372.2822.2362.1652.0892.0071.9641.9191.8721.8221.7681.711
264.2253.3692.9752.7432.5872.4742.3882.3212.2652.2202.1482.0721.9901.9461.9011.8531.8031.7491.691
274.2103.3542.9602.7282.5722.4592.3732.3052.2502.2042.1322.0561.9741.9301.8841.8361.7851.7311.672
284.1963.3402.9472.7142.5582.4452.3592.2912.2362.1902.1182.0411.9591.9151.8691.8201.7691.7141.654
294.1833.3282.9342.7012.5452.4322.3462.2782.2232.1772.1042.0271.9451.9011.8541.8061.7541.6981.638
304.1713.3162.9222.6902.5342.4212.3342.2662.2112.1652.0922.0151.9321.8871.8411.7921.7401.6831.622
404.0853.2322.8392.6062.4492.3362.2492.1802.1242.0772.0031.9241.8391.7931.7441.6931.6371.5771.509
604.0013.1502.7582.5252.3682.2542.1672.0972.0401.9931.9171.8361.7481.7001.6491.5941.5341.4671.389
1203.9203.0722.6802.4472.2902.1752.0872.0161.9591.9101.8341.7501.6591.6081.5541.4951.4291.3521.254
∞3.8412.9962.6052.3722.2142.0992.0101.9381.8801.8311.7521.6661.5711.5171.4591.3941.3181.2211.000

What is an F-table?

The F distribution describes the ratio of two independent variance estimates, each divided by its degrees of freedom. It appears whenever a test compares variances: one-way ANOVA (between-group against within-group mean squares), the overall F-test in regression, and the F-test for equality of two variances. F is never negative and is skewed to the right, so its critical values come from the upper tail.

The same table goes by several names: F distribution table, F-test table, F statistic table, F critical value table, F chart or "ftable", and, after the two statisticians behind the distribution, the Fisher–Snedecor distribution table. The number you read from it is called the tabulated F value or F crit, and you compare it with the F value calculated from your data.

Because the distribution has two degree-of-freedom parameters, each significance level needs its own two-way grid. This page has four F tables, for α = 0.10, 0.05, 0.025 and 0.01. Columns give the numerator df₁ (1–10, 12, 15, 20, 24, 30, 40, 60, 120 and ∞) and rows give the denominator df₂ (1–30, 40, 60, 120 and ∞). Each cell is the value F_c with P(F ≥ F_c) = α. For any other df or α, for left-tailed and two-tailed values, or for an exact p-value, use the lookup above the table.

How to read the F-table

  1. Work out both degrees of freedom. In one-way ANOVA, df₁ = k − 1 (number of groups minus one) and df₂ = N − k (total observations minus number of groups).
  2. Select the table for your significance level with the α buttons. For a two-sided test of two variances at α = 0.05, use the α = 0.025 table for the upper critical value.
  3. Find the column for df₁, the numerator degrees of freedom.
  4. Find the row for df₂, the denominator degrees of freedom. Do not swap them: F(3, 20) and F(20, 3) have very different critical values.
  5. Read the cell, and reject H₀ if the calculated F is greater than this tabulated F value. If a df is missing, use the exact lookup or the rule in the FAQ below.

Examples

One-way ANOVA

Problem. An ANOVA compares k = 4 groups with N = 24 observations in total and gives F = 3.45. Is the result significant at α = 0.05?

  1. 01df₁ = k − 1 = 3 and df₂ = N − k = 20.
  2. 02In the α = 0.05 table, column 3 and row 20 give 3.098.
  3. 03Compare: 3.45 > 3.098.

Answer. Reject H₀ at α = 0.05: at least one group mean differs (the exact p-value is about 0.036).

Overall F-test in regression

Problem. A multiple regression with m = 4 predictors is fitted to n = 35 observations. What F is needed for significance at α = 0.01?

  1. 01df₁ = m = 4.
  2. 02df₂ = n − m − 1 = 35 − 4 − 1 = 30.
  3. 03In the α = 0.01 table, column 4 and row 30 give 4.018.

Answer. The regression is significant at the 1% level only if F > 4.018.

Two-sided test of two variances

Problem. Samples of n₁ = 11 and n₂ = 13 are used to test H₀: σ₁² = σ₂² against H₁: σ₁² ≠ σ₂² at α = 0.05, with F = s₁² / s₂². Find both critical values.

  1. 01df₁ = 10 and df₂ = 12. Each tail gets α/2 = 0.025, so use the α = 0.025 table.
  2. 02Upper critical value: column 10, row 12 gives 3.374.
  3. 03Lower critical value: swap the degrees of freedom, read column 12, row 10 (3.621), and take the reciprocal: 1 / 3.621 = 0.276.

Answer. Reject H₀ if F < 0.276 or F > 3.374. Choosing "Two-tailed" in the lookup gives the same pair.

Which α table should you use?

ANOVA and regression F-tests are always right-tailed, so use the table whose α matches your significance level. The two-variance F-test is different when the alternative is two-sided: a ratio far below 1 is as much evidence as one far above 1, so α is split across both tails and you read the α/2 table.

TestTailTable at a 5% significance leveldf₁, df₂
One-way ANOVARightα = 0.05k − 1, N − k
Overall F-test in regressionRightα = 0.05m, n − m − 1 (m predictors)
Two variances, H₁: σ₁² > σ₂²Rightα = 0.05n₁ − 1, n₂ − 1
Two variances, H₁: σ₁² ≠ σ₂²Bothα = 0.025 for the upper value, reciprocal rule for the lowern₁ − 1, n₂ − 1

F table at α = 0.05: most-used critical values

Most F-tests are run at the 5% level with a handful of groups or predictors, so these are the values you will look up most often. Rows are the denominator df₂ and columns the numerator df₁. For example, 2 and 15 degrees of freedom give 3.682, and 2 and 16 give 3.634. The full α = 0.05 grid, with df₂ 1–30, 40, 60, 120 and ∞, is in the table above.

df₂ ↓ / df₁ →123456810
56.6085.7865.4095.1925.0504.9504.8184.735
104.9654.1033.7083.4783.3263.2173.0722.978
124.7473.8853.4903.2593.1062.9962.8492.753
154.5433.6823.2873.0562.9012.7902.6412.544
164.4943.6343.2393.0072.8522.7412.5912.494
204.3513.4933.0982.8662.7112.5992.4472.348
244.2603.4033.0092.7762.6212.5082.3552.255
304.1713.3162.9222.6902.5342.4212.2662.165
604.0013.1502.7582.5252.3682.2542.0971.993
1203.9203.0722.6802.4472.2902.1752.0161.910

Finding a p-value with the F table

One F table cannot give an exact p-value, but the four α tables together can bracket it. Look up the same (df₁, df₂) cell in each table and see which two critical values your F statistic falls between: the p-value lies between those two α levels.

Example: F = 3.45 with df₁ = 3 and df₂ = 20. The cell reads 2.380 at α = 0.10, 3.098 at 0.05, 3.859 at 0.025 and 4.938 at 0.01. Because 3.098 < 3.45 < 3.859, the p-value is between 0.025 and 0.05; the exact value is 0.036. If F is above the α = 0.01 value, report p < 0.01; if it is below the α = 0.10 value, report p > 0.10. Type your statistic into the lookup above, or use the P-Value from F Calculator, for the exact p-value.

Calculated F vs tabulated F (F crit)

The calculated F comes from your data, for example MS_between / MS_within in an ANOVA table. The tabulated F, often labelled F crit, comes from this page and depends only on α, df₁ and df₂. The decision rule is the same for every right-tailed F-test: if calculated F > tabulated F, reject H₀.

Software prints the same tabulated value. Excel’s ANOVA output has an "F crit" column, and =F.INV.RT(0.05, 3, 20) returns 3.098; in R, qf(0.95, 3, 20) gives the same number. These match the α = 0.05 table at column 3, row 20.

Left-tailed and two-tailed F critical values

F tables print only upper-tail values. To get a lower-tail critical value, use the reciprocal identity: the value with area α below it in F(df₁, df₂) equals 1 divided by the upper-tail α value of F(df₂, df₁). Swap the degrees of freedom, look up the upper value, and take its reciprocal. For a two-tailed test, do this with α/2 for the lower value and read the α/2 table for the upper value. The Tail setting in the lookup does both steps for you.

A common shortcut avoids lower critical values altogether. Put the larger sample variance in the numerator, so that F ≥ 1, use that sample’s df as df₁, and compare F with the upper α/2 critical value.

Relationship to the t-table

When df₁ = 1, the F critical value is the square of the two-tailed t critical value with the same denominator df. In the α = 0.05 table, F(1, 10) = 4.965, which is 2.228² up to rounding, and 2.228 is the two-tailed 5% value for df = 10 in the t-table. This is why a two-group ANOVA and a pooled t-test always reach the same conclusion.

For an exact critical value at any df or α, use the lookup on this page or the F Critical Value Calculator. To run the full analysis, use the ANOVA Calculator or the F-Test Calculator. If you are not sure which ANOVA design you have, and so which degrees of freedom apply, see One-Way vs Two-Way ANOVA: Differences and When to Use Each.

Print or download the F table

Use Download PDF at the top of the page for a printable copy: the four F tables are Tables 4a–4d (α = 0.10, 0.05, 0.025 and 0.01, pages 6–9) of the free Statculator statistical tables PDF, which also holds the z, t, chi-square and Pearson r tables. Print / save as PDF prints this page with all four F tables and no scroll box.

Every value is computed from the exact F inverse CDF and rounded to three decimals, so it can differ from older printed tables in the last digit. You can check any entry against the NIST/SEMATECH e-Handbook table of upper critical values of the F distribution, which uses the same layout; its F distribution page gives the formulas.

Frequently asked questions

Which degrees of freedom go across the top of an F table?

The numerator degrees of freedom, df₁, run across the columns, and the denominator degrees of freedom, df₂, run down the rows. In one-way ANOVA, df₁ = k − 1 belongs to the between-group mean square and df₂ = N − k to the within-group mean square.

What is the F table value at 0.05?

There is no single value: the 0.05 critical value depends on both degrees of freedom. For example, it is 3.098 for (3, 20), 3.885 for (2, 12) and 4.965 for (1, 10). Pick the α = 0.05 table on this page and read the cell for your df₁ column and df₂ row.

What is the F critical value for α = 0.05 with 2 and 12 degrees of freedom?

It is 3.885. A one-way ANOVA with three groups and 15 observations in total has these degrees of freedom, so an F statistic above 3.885 is significant at the 5% level.

Why is there a separate F table for each α?

The F distribution has two degree-of-freedom parameters, so the rows and columns are already used for df₂ and df₁. Each significance level therefore needs its own grid, which is why this page has separate tables for α = 0.10, 0.05, 0.025 and 0.01.

How do you find a p-value from an F table?

Look up your (df₁, df₂) cell in each α table and find the two critical values your F statistic falls between; the p-value lies between their α levels. With F = 3.45 and df (3, 20), the statistic sits between 3.098 (α = 0.05) and 3.859 (α = 0.025), so 0.025 < p < 0.05. For the exact p-value, enter the statistic in the lookup on this page.

What if my degrees of freedom are not in the F table?

For a missing denominator df, the next smaller listed df₂ gives a slightly larger critical value, which makes the test conservative. For a missing numerator df, interpolate between the neighbouring columns. The interactive lookup on this page and the F Critical Value Calculator give exact values for any df.

Can an F statistic be less than 1?

Yes. F is a ratio of two variance estimates, and when the numerator estimate happens to be the smaller one, F is below 1. In ANOVA and regression an F below 1 is never significant at the usual α levels, because every upper critical value at those levels is above 1 for finite degrees of freedom.

Cite this page

Statculator. (2026, November 14). F-Table (F Distribution Table). Retrieved November 14, 2026, from https://statculator.com/tables/f-table/

Values are computed from the exact distribution functions used by Statculator’s calculators (see methodology).