Skip to content
Statculator
Math & Percentages

Scientific Calculator

Free, no sign-up Runs in your browserBy Hira Noor, BS MathematicsUpdated

Angle unit for sin, cos and tan
=5

Type with your keyboard or use the keys. Enter or = evaluates and Esc clears. You can also type sinh(x), cosh(x), tanh(x), log2(x), logb(x, base), exp(x), round(x), floor(x) and ceil(x).

History

Press = to save a calculation here. The last 10 are kept on this device; select one to load it again.

Try an example

What is a Scientific Calculator?

A scientific calculator works out a whole expression at once, including trigonometry in degrees or radians, logarithms, powers, roots, factorials, combinations and the constants π and e. This free online one follows the standard order of operations, shows the result as you type, works from your keyboard and keeps your last 10 calculations.

What the Scientific Calculator does

Type an expression such as 2 × sin(30) + √16, or build it with the on-screen keys, and the result appears underneath as you go. Pressing = (or Enter) confirms the answer, stores it in Ans and adds the line to the history. The keypad covers sin, cos and tan with their inverses, natural and base-10 logarithms, powers, square and cube roots, factorials, combinations and permutations, percent, reciprocal, absolute value, π, e and scientific notation through the EE key.

Use it for anything a handheld scientific calculator does in a maths, physics, chemistry or statistics course: checking one step of a problem, turning a formula into a number, or seeing how a result moves when one value changes. Because the whole expression stays visible and editable, a slip is corrected by fixing one character instead of starting again. When you need a statistic from a list of data, a dedicated tool is quicker, for example the Standard Deviation Calculator or the Z-Score Calculator.

How to use the Scientific Calculator

  1. Choose DEG or RAD at the top of the display. The setting is used by sin, cos and tan and by their inverses.
  2. Enter the calculation in the Expression box, with your keyboard or with the keys. Press 2nd to reach sin⁻¹, cos⁻¹, tan⁻¹, x³, the cube root, e^x, 10^x, nPr and mod.
  3. Read the live result under the expression, then press = or Enter to confirm it. Brackets still open at that point are closed for you; any other problem is explained in a short message.
  4. Carry on from the answer: an operator pressed straight after = starts the next line with Ans, while a digit starts a new calculation.
  5. Use History to load an earlier expression again, and Copy to copy any result.

Rules and formulas the calculator applies

A scientific calculator has no single formula. These are the conventions and identities it uses when it reads an expression.

Order of operations (highest priority first)
( ) → functions → x! x² % → ^ → −x → × ÷ → + −
Degrees and radians
radians = degrees × π / 180, degrees = radians × 180 / π
Logarithms
log x = log₁₀ x, ln x = logₑ x, logb(x, b) = ln x / ln b
Logarithm identities
log(a × b) = log a + log b, log(a^n) = n × log a, 10^(log x) = e^(ln x) = x
Powers and roots
√x = x^(1/2), root(x, n) = x^(1/n), x⁻¹ = 1 / x, a^b^c = a^(b^c)
Factorials and counting
n! = n × (n − 1) × … × 2 × 1, nPr = n! / (n − r)!, nCr = n! / (r! × (n − r)!)
Percent and scientific notation
x% = x / 100, a E b = a × 10^b
Formula symbols
SymbolMeaning
x, a, bany real numbers the function accepts
n, rwhole numbers with 0 ≤ r ≤ n; n can be at most 170 in n!
πpi, 3.14159265359 to 12 significant digits
eEuler’s number, 2.71828182846
Ansthe result of the last calculation confirmed with =
DEG, RADthe angle unit read by sin, cos and tan and returned by sin⁻¹, cos⁻¹ and tan⁻¹

Implied multiplication, as in 2π or 3(4 + 1), has the same priority as × and ÷ and is worked left to right. Handheld calculators do not all agree on this, so add brackets whenever it matters.

Worked example

Worked example: 2 × sin(30) + √16

Problem. Evaluate 2 × sin(30°) + √16, the expression the calculator opens with, and see what changes in radian mode.

  1. 01Set the angle unit to DEG and enter 2 × sin(30) + √16.
  2. 02Functions come first: sin(30°) = 0.5 and √16 = 4.
  3. 03Multiplication is next: 2 × 0.5 = 1.
  4. 04Addition is last: 1 + 4 = 5.
  5. 05Now switch to RAD. The same keys give 2 × sin(30 rad) + 4 = 2 × (−0.9880) + 4 = 2.0239, because 30 radians is a little under five full turns rather than a twelfth of one.

Answer. 2 × sin(30) + √16 = 5 in degree mode and 2.0239 in radian mode. When a trigonometry answer looks wrong, check the DEG/RAD switch first.

Every key and function

Each key inserts text into the expression, so anything on the keypad can also be typed. Function names are not case-sensitive, and the asterisk and slash keys of a keyboard appear as × and ÷. Keys marked 2nd are reached by pressing 2nd first.

Key or nameWhat it doesExample
+ − × ÷Add, subtract, multiply and divide7 − 2 × 3 = 1
( )Group part of an expression so that it is worked out first(7 − 2) × 3 = 15
x² and x^ySquare a value, or raise it to any power7² = 49, 2^10 = 1024
√ and 2nd √Square root and cube root√81 = 9, ∛27 = 3
2nd x^yThe nth root of x, inserted as root(x, n)root(32, 5) = 2
1/xReciprocal, shown as ⁻¹ after the value4⁻¹ = 0.25
x!Factorial of a whole number from 0 to 1705! = 120
nCr and 2nd nCrCombinations, and permutations (nPr), of r items chosen from nnCr(5, 2) = 10, nPr(5, 2) = 20
% and 2nd %Percent (divide by 100), and mod, the remainder after division200 × 15% = 30, mod(17, 5) = 2
sin cos tanSine, cosine and tangent of an angle in the current unitsin(30) = 0.5 in DEG
2nd sin, cos, tanThe inverses sin⁻¹, cos⁻¹ and tan⁻¹ (also typed asin, acos, atan); the angle is returned in the current unitcos⁻¹(0.5) = 60 in DEG
ln and 2nd lnNatural logarithm, and its inverse e^xln(e^3) = 3
log and 2nd logBase-10 logarithm, and its inverse 10^xlog(1000) = 3
|x|Absolute value, inserted as abs(x)abs(−7) = 7
π and eThe constants 3.14159265359 and 2.718281828462π = 6.28318530718
EEScientific notation: a E b means a × 10^b6.02E23 × 2 = 1.204 × 10²⁴
AnsThe last answer confirmed with =After 5, Ans × 2 = 10
AC and backspaceClear the whole expression, or delete the item before the cursorAC empties the display
Typed: sinh, cosh, tanhHyperbolic sine, cosine and tangent (not affected by DEG/RAD)sinh(1) = 1.17520119364
Typed: log2, logb, expBase-2 logarithm, logarithm to any base as logb(x, base), and e to the power xlog2(1024) = 10, logb(81, 3) = 4, exp(2) = 7.38905609893
Typed: round, floor, ceilRound to the nearest whole number (halves away from zero) or to d decimal places with round(x, d); round down; round upround(2.567, 2) = 2.57, floor(−2.5) = −3, ceil(2.1) = 3

Coming from a Casio or TI handheld

The keypad follows the layout of a school scientific calculator, so most key sequences carry over. The main differences are in the names of a few keys and in how an expression is confirmed.

On a Casio or TI handheldOn this calculator
SHIFT (Casio) or 2nd (TI)2nd, which reaches the inverse trig functions, x³, the cube root, e^x, 10^x, nPr and mod
Angle unit set in SETUP or MODEThe DEG/RAD switch at the top of the display
×10^x (Casio) or EE / ×10ⁿ (TI)EE, or a capital E typed from the keyboard
A separate (−) key for negative numbersThe ordinary − key, which works for both
AnsAns, which an operator inserts for you straight after =
Replay arrows to scroll past entriesHistory, which lists the last 10 calculations; tap one to load it again

Order of operations

The calculator reads an expression the way it is written in algebra, not key by key. Operations with higher priority are completed first, and operations of equal priority run left to right, except powers, which run right to left. From first to last:

  1. Brackets, starting with the innermost pair.
  2. Functions such as sin, ln and √, which act on the value or bracket that follows them.
  3. Postfix operators: factorial (!), squaring (²), percent (%) and the reciprocal (⁻¹) act on the value just before them.
  4. Powers (^), from right to left, so 2^3^2 = 2^9 = 512.
  5. The negative sign, which is applied after powers: −3² = −9, while (−3)² = 9.
  6. Multiplication and division, from left to right, including implied multiplication such as 2π.
  7. Addition and subtraction, from left to right.
ExpressionResultWhy
2 + 3 × 414Multiplication comes before addition
−3²−9The power is applied before the negative sign
2^3^2512Powers group from the right: 2^(3^2)
2^3!64The factorial is applied first: 2^6
6 ÷ 2(1 + 2)9Implied multiplication ranks with ÷, so this is 6 ÷ 2 × 3
1 ÷ 2π1.57079632679Read as (1 ÷ 2) × π; type 1 ÷ (2π) to get 0.159154943092
100 + 10%100.110% is 0.1; for a 10% increase type 100 × (1 + 10%) = 110
√16 + 913A bare √ covers only the next value; type √(16 + 9) to get 5

Degrees, radians and common angles

A full turn is 360 degrees or 2π radians. Geometry, navigation and surveying problems usually quote degrees; calculus, physics formulas that involve angular frequency, and most programming languages use radians. In RAD mode an angle can be typed as a multiple of π, for example sin(π/6). The values below are rounded to 4 decimal places.

DegreesRadianssincostan
0°0010
30°π/6 ≈ 0.52360.50.86600.5774
45°π/4 ≈ 0.78540.70710.70711
60°π/3 ≈ 1.04720.86600.51.7321
90°π/2 ≈ 1.570810undefined
180°π ≈ 3.14160−10
270°3π/2 ≈ 4.7124−10undefined
360°2π ≈ 6.2832010

Common use cases

  • Trigonometry and geometry: a 4 m ladder leaning at 65° to the ground reaches 4 × sin(65) = 3.6252 m up the wall.
  • Physics and engineering: the speed after a 20 m fall is √(2 × 9.81 × 20) = 19.8091 m/s.
  • Chemistry: the pH of a solution with a hydrogen-ion concentration of 3.2 × 10⁻⁵ mol/L is −log(3.2E−5) = 4.4949.
  • Finance: 1,000 invested at 5% a year, compounded monthly for 10 years, grows to 1000 × (1 + 0.05 ÷ 12)^(12 × 10) = 1,647.01.
  • Probability and statistics: the number of 5-card hands from a 52-card deck is nCr(52, 5) = 2,598,960. For the working behind a count like this, see the Combination Calculator and the Permutation Calculator.

Assumptions and limitations

  • Floating-point precision: numbers are stored as 64-bit doubles, which carry about 15 to 16 significant digits. Results are rounded to 14 digits and displayed with up to 12, which hides artefacts such as 0.1 + 0.2 = 0.30000000000000004. Digits beyond the 12th are not shown, and subtracting two nearly equal large numbers can still lose accuracy.
  • Factorial limit: x! accepts whole numbers from 0 to 170. 171! is about 1.24 × 10³⁰⁹, more than the largest double (about 1.8 × 10³⁰⁸), and factorials of fractions (the gamma function) are not supported. The Factorial Calculator shows the working for a single factorial.
  • Angle mode: sin, cos and tan read their input in the unit set by the DEG/RAD switch. The most common wrong answer on any scientific calculator is a correct calculation in the wrong mode: sin(30) is 0.5 in degrees and −0.9880 in radians.
  • Real numbers only: the square root or logarithm of a negative number, sin⁻¹ or cos⁻¹ of a value outside −1 to 1, a negative number raised to a fractional power and division by zero all return an error message, not a complex number or infinity. tan(90°) is reported as undefined.
  • Percent is a plain division by 100: 100 + 10% is 100.1, not 110. Write 100 × (1 + 10%) for a percentage increase, or use the Percentage Calculator and the Percentage Change Calculator.
  • Conventions that vary between calculators: implied multiplication ranks equal with × and ÷; a typed 2e-3 is read as the number 0.002 (write 2 × e − 3 for the other meaning); round(x) rounds halves away from zero (the Rounding Calculator offers other rules); and mod returns the floored remainder, so mod(−17, 5) = 3. The Modulo Calculator compares the remainder conventions.
  • History is kept only in this browser on this device, and holds the last 10 calculations.

Frequently asked questions

How do I switch between degrees and radians?

Use the DEG/RAD switch at the top right of the display. DEG treats the input of sin, cos and tan as degrees, RAD treats it as radians, and the inverse functions return their angle in the same unit. The result updates as soon as you change the setting. To convert by hand, multiply degrees by π/180, or radians by 180/π.

Why does sin(30) give −0.988 instead of 0.5?

The calculator is in radian mode. sin(30°) is 0.5, but 30 radians is about 1,719 degrees, and its sine is −0.9880. Switch to DEG, or stay in RAD and enter the angle as a multiple of π: sin(π/6) = 0.5.

What order of operations does a scientific calculator use?

Brackets first, then functions, then factorial, squaring and percent, then powers (right to left), then the negative sign, then multiplication and division (left to right), and finally addition and subtraction. So 2 + 3 × 4 = 14, −3² = −9 and 2^3^2 = 512. On this calculator implied multiplication such as 2π ranks equal with × and ÷, which makes 6 ÷ 2(1 + 2) equal to 9.

How do I enter scientific notation?

Press EE (or type a capital E) between the number and its power of ten: 6.02E23 means 6.02 × 10²³ and 1.6E−19 means 1.6 × 10⁻¹⁹. Results from about 10¹² upward, and results smaller than 0.000001, are displayed in the same × 10ⁿ form, which can be pasted back into the expression.

What does the Ans key do?

Ans holds the result of the last calculation confirmed with = or Enter. An operator pressed straight after a result inserts it for you, so 5 followed by × 2 becomes Ans × 2 = 10, and pressing = repeatedly on Ans + 1 counts upward. When the page opens, Ans is 5, the value of the sample expression.

Why does the factorial stop at 170?

170! is about 7.26 × 10³⁰⁶, close to the largest number a 64-bit floating-point value can hold (about 1.8 × 10³⁰⁸). 171! would overflow, so the calculator reports an error instead of showing infinity. Factorials are also limited to whole numbers of 0 or more.

Does this work like a Casio or TI scientific calculator?

For everyday work, yes: the same functions, the same Ans and EE keys, and a 2nd key in place of SHIFT. It does not have the extra modes of advanced handhelds, such as fraction display, equation solving, matrices, complex numbers or calculus. One result can differ: with implied multiplication, 6 ÷ 2(1 + 2) gives 9 here and on TI models, while many recent Casio models give 1.

How accurate is this online scientific calculator?

It uses standard 64-bit floating-point arithmetic, the same as spreadsheets and most programming languages, and displays up to 12 significant digits. Values that should be exact are cleaned up, so 0.1 + 0.2 shows 0.3 and both sin(180°) and cos(90°) show 0. Work that needs more than about 14 digits calls for arbitrary-precision software.

Cite this page

Statculator. (2026, November 14). Scientific Calculator. Retrieved November 14, 2026, from https://statculator.com/math/scientific-calculator/