Skip to content
Statculator
Math & Percentages

Percentage Decrease Calculator

Find the percent decrease between two values or take a percentage off a number, with the saving, the formula, steps and the rise needed to recover.

Free, no sign-up Runs in your browserBy Hira Noor, BS MathematicsUpdated

Try
What do you need?

The starting value: the full price, or the figure before the fall.

The new value: the sale price, or the figure after the fall.

Results

Percentage decrease
30%
Amount of decrease
36
What you save, if this is a discount
Increase needed to recover
42.8571%
From 84 back to 120
Original value
120
Reduced value
84
Reduced value as a percent of the original
70%
Multiplier (1 − P / 100)
0.7
Same decrease applied twice
58.8 (51% off in total)

Interpretation: From 120 to 84 is a decrease of 30%: 36 less than the original, leaving 70% of it. Getting from 84 back to 120 would take an increase of 42.8571%, not 30%, because the rise is measured against the smaller value.

Bar chart of 2 categoriesOriginalOriginal: 120120ReducedReduced: 8484020406080100120
Original 120 and reduced 84: the gap of 36 is 30% of the original.

Increase needed to recover from a decrease

DecreaseShare leftLeft from 120Increase needed to recover
5%95%1145.2632%
10%90%10811.1111%
20%80%9625%
25%75%9033.3333%
30%70%8442.8571%
40%60%7266.6667%
50%50%60100%
60%40%48150%
75%25%30300%
90%10%12900%

The highlighted row is your decrease. The recovery percentage is always larger than the decrease, because it is a percentage of the smaller value that is left.

Step-by-step solution

  1. 1

    Find the amount of the decrease

    decrease = original − reduced = 120 − 84 = 36
  2. 2

    Divide by the original value

    The original value is the base: it is the 100% that the decrease is compared with.

    36 / 120 = 0.3
  3. 3

    Multiply by 100

    percentage decrease = 0.3 × 100 = 30%
  4. 4

    Find the increase needed to recover

    The way back is measured against the reduced value, not the original.

    36 / 84 × 100 = 42.8571%
    or P / (100 − P) × 100 = 30 / 70 × 100 = 42.8571%

What is a Percentage Decrease Calculator?

A percentage decrease calculator finds how far a value has fallen as a share of where it started: (original − new) ÷ original × 100. A jacket cut from 120 to 84 drops by 36, and 36 ÷ 120 × 100 = 30%, so the percent decrease is 30%. It also works forwards, taking a percentage off a number to give the new value and the saving, and it shows the larger rise needed to get back: 42.86% after a 30% fall.

What the Percentage Decrease Calculator does

Use Decrease between two values when you know the starting and the new figure and want the percentage: a markdown, a fall in sales, weight lost, a drop in a share price. Use Decrease a value by a percent when you know the percentage and want the new value: the sale price after 20% off, and the amount you save.

Percent decrease, percent of decrease and decrease percentage are three names for the same number, and calculating a percent decrease always uses the original value as the base. A decrease is not the mirror image of an increase, though.

After a 30% fall you need a rise of 42.86% to get back to where you started, and after a 50% fall you need 100%. The calculator gives the recovery percentage for your numbers and a table of it for common decreases. The Percentage Increase Calculator handles rises, the Percentage Change Calculator reports a rise or a fall as a single signed percentage, and the Percentage Difference Calculator compares two values when neither one is the starting point.

How to use the Percentage Decrease Calculator

  1. Pick a mode: Decrease between two values if you have the before and after figures, or Decrease a value by a percent if you have the original and the percentage off.
  2. Enter the Original value: the full price or the figure before the fall.
  3. Enter the Reduced value, or type the percentage into Decrease by (30 for 30% off).
  4. Read the percentage decrease or the reduced value, with the amount taken off beside it.
  5. Check Increase needed to recover and the table below the results before assuming an equal rise would undo the fall.

Percentage Decrease formula

Percentage decrease between two values
% decrease = (original − reduced) / original × 100
Value after a decrease of P%
reduced = original × (1 − P / 100)
Amount taken off (the saving)
saved = original × P / 100
Increase needed to recover from a decrease of P%
recovery % = P / (100 − P) × 100
Formula symbols
SymbolMeaning
originalthe starting value before the decrease (the base, 100%)
reducedthe new or final value after the decrease
Pthe percentage decrease
1 − P / 100the share that is left: 0.70 after 30% off

The recovery formula works for decreases below 100%. At exactly 100% nothing is left, and no percentage increase can restore it.

Worked example

Worked example: a marked-down jacket

Problem. A jacket priced at 120 is on sale for 84. What is the percentage discount, and by what percentage would the sale price have to rise to return to the full price?

  1. 01Amount of decrease: 120 − 84 = 36. That is the saving.
  2. 02Divide by the original price: 36 ÷ 120 = 0.30.
  3. 03Multiply by 100: 30% off. You pay 84 ÷ 120 = 70% of the original price.
  4. 04Recovery: the 36 has to be added back to 84, and 36 ÷ 84 = 0.4286, so the rise needed is 42.86%.
  5. 05Check with the formula: 30 ÷ (100 − 30) × 100 = 42.86%.

Answer. The jacket is 30% cheaper. Going back up from 84 to 120 is a 42.86% increase, because the same 36 is a bigger share of the smaller price.

Why a 50% decrease needs a 100% increase to recover

A decrease is measured against the original value, but the recovery is measured against the smaller value left behind. Lose 50% of 200 and you have 100. Getting back to 200 means adding 100, which is 100% of what you now have. The deeper the fall, the more lopsided this becomes: a 90% fall needs a 900% rise.

This is why a portfolio that drops 20% and then gains 20% is still 4% down, and why a shop that marks a price up by 25% can later advertise “20% off” and be back at the original price.

DecreaseShare leftIncrease needed to recover
10%90%11.11%
20%80%25%
25%75%33.33%
33.33%66.67%50%
50%50%100%
75%25%300%
80%20%400%
90%10%900%

Stacked discounts do not add up

Two discounts applied one after the other multiply. “20% off, then an extra 10% off” leaves 0.80 × 0.90 = 0.72 of the price, a combined discount of 28%, not 30%. The order does not matter: 10% off and then 20% off gives the same 28%.

On an item priced at 150 that means a final price of 108 rather than 105. To combine any two discounts, multiply the shares that are left after each one and subtract the result from 1.

Finding the original price before a discount

If you paid 84 after 30% off, the original price was 84 ÷ 0.70 = 120. Divide the sale price by 1 − P ÷ 100. Adding 30% back onto 84 only reaches 109.20, because 30% of the sale price is a smaller amount than 30% of the original price.

Percentage decrease vs percentage change and percentage difference

All three compare two numbers, but they answer different questions. Percentage decrease is the size of a fall, written as a positive number. Percentage change uses the same base with the sign kept, so one formula covers a percent increase or decrease: a fall comes out negative. Percentage difference has no starting point at all and divides by the average of the two values.

When the values are themselves rates, say so in points as well. An interest rate cut from 8% to 6% is a fall of 2 percentage points, which is a 25% decrease in the rate.

MeasureFormulaFrom 120 to 84
Percentage decrease(original − new) ÷ original × 10030%
Percentage change(new − original) ÷ original × 100−30%
Percentage difference|a − b| ÷ ((a + b) ÷ 2) × 10035.29%

Common use cases

  • Discounts and sales: the sale price and the saving from a percentage off, or the percentage behind a “was / now” price tag.
  • Losses and depreciation: how far a share price, a property value or a car’s resale value has fallen.
  • Shrinking pack sizes: a pack that goes from 500 g to 450 g at the same price has lost 10% of its contents.
  • Population and sales declines: a town that shrinks from 25,000 to 23,500 residents has fallen by 6%.
  • Budget and cost cuts: the new budget after an 8% reduction, or the percentage saved by switching supplier.
  • Health and performance targets: weight lost as a percentage of starting weight, or the drop in an error rate or loading time.

Assumptions and limitations

  • A decrease from 0 has no percentage, so the original value must not be 0 in the two-value mode. If the original is negative (a loss that deepens, say), the fall is measured against its absolute value and the multiplier is not shown.
  • A positive quantity cannot fall by more than 100%: a 100% decrease takes it to 0. The calculator still applies larger percentages and the result goes negative, which only makes sense for quantities such as profit that can cross zero.
  • If the second value is larger than the original, the result is a negative decrease, in other words an increase. The calculator flags it; use the Percentage Increase Calculator.
  • A fall in a rate that is itself a percentage can be stated two ways. From 8% to 6% is 2 percentage points, or a 25% decrease; the Percentage Change Calculator explains the difference.
  • Prices are shown exactly. Shops round to the nearest cent or penny, so a till price can differ by a fraction of a cent; the Rounding Calculator shows the result under each rounding rule.

Frequently asked questions

How do you work out a percentage decrease?

Subtract the new value from the original, divide the drop by the original value and multiply by 100. A price cut from 120 to 84 is a drop of 36, and 36 ÷ 120 × 100 = 30%. To calculate the decrease percentage, always divide by the original value even though it is the larger number; dividing by 84 gives 42.86%, which is the rise needed to recover, not the decrease.

How do you decrease a number by 20%?

Multiply it by 0.80, the share left after a 20% decrease. A price of 250 decreased by 20% is 0.80 × 250 = 200, and the amount taken off is 0.20 × 250 = 50. For any percentage P, multiply by 1 − P ÷ 100: 25% off 64 is 0.75 × 64 = 48.

How do I find the original price before a discount?

Divide the sale price by 1 minus the discount as a decimal. A sale price of 84 after 30% off means an original price of 84 ÷ 0.70 = 120. Do not add 30% to the sale price; that gives 109.20, which is too low.

Why does a 50% loss need a 100% gain to break even?

Because the gain is a percentage of the smaller amount left after the loss. Losing 50% of 200 leaves 100, and getting back to 200 means adding 100, which is 100% of the 100 you now hold. In general the gain needed after a loss of P% is P ÷ (100 − P) × 100.

Can a percentage decrease be more than 100%?

Not for a quantity that cannot go below zero, such as a price, a weight or a count: a 100% decrease already takes it to zero. A decrease above 100% is only possible when the value can turn negative, for example a profit of 100 becoming a loss of 20, which is a 120% decrease.

Can a percentage decrease be negative?

Yes, and a negative percentage decrease means the value went up. From 80 to 100 is (80 − 100) ÷ 80 × 100 = −25%, which is the same as a 25% increase. The calculator flags this case and points you to the percentage increase calculator, which states the same result with growth wording.

What is the difference between percentage decrease and percentage change?

Percentage change keeps the sign, so it covers a percent increase or decrease with one formula: (new − original) ÷ original × 100. A fall from 120 to 84 is a change of −30%, which is a percentage decrease of 30%. Use percentage decrease when you already know the value fell and want the size of the fall as a positive number.

Cite this page

Statculator. (2026, November 14). Percentage Decrease Calculator. Retrieved November 14, 2026, from https://statculator.com/math/percentage-decrease-calculator/