Skip to content
Statculator
Math & Percentages

Decimal to Percent Calculator

Convert a decimal to a percent by multiplying by 100: 0.375 = 37.5%. Also takes fractions, shows every step, the fraction in lowest terms and a chart.

Free, no sign-up Runs in your browserBy Hira Noor, BS MathematicsUpdated

Try

A decimal (0.375), a fraction (3/8) or a mixed number (1 1/2). Values above 1 and negative values are fine.

Results

0.375 as a percent
37.5%
0.375 × 100
Fraction in lowest terms
3/8
Decimal
0.375
Percent
37.5%
Fraction from the decimal digits
375/1000
Greatest common divisor
125
Fraction in lowest terms
3/8

Interpretation: 0.375 = 37.5%. That is 37.5 out of every 100, or 3/8 as a fraction.

Common decimal to percent conversions

DecimalFractionPercent
0.011/1001%
0.051/205%
0.11/1010%
0.1251/812.5%
0.21/520%
0.251/425%
0.3333…1/333.3333…%
0.3753/837.5%
0.51/250%
0.753/475%
11100%
1.53/2150%

The highlighted row is your value. Every row follows the same rule: multiply the decimal by 100.

Step-by-step solution

  1. 1

    Multiply the decimal by 100

    A percentage counts in hundredths, so the number of hundredths is the decimal times 100.

    0.375 × 100 = 37.5
  2. 2

    Or move the decimal point two places to the right

    Multiplying by 100 shifts every digit two places. If you run out of digits, fill the gaps with zeros.

    0.375 → 3.75 → 37.5
  3. 3

    Attach the percent sign

    0.375 = 37.5%
  4. 4

    Write the decimal as a fraction in lowest terms

    0.375 has 3 decimal places, so put its digits over 1 followed by 3 zeros, then divide top and bottom by their greatest common divisor.

    0.375 = 375/1000
    gcd(375, 1000) = 125
    375/1000 = 3/8

What is a Decimal to Percent Calculator?

To convert a decimal to a percent, multiply it by 100 and add the % sign: 0.375 × 100 = 37.5%. That is the same as moving the decimal point two places to the right, so 0.55 = 55%, 1.75 = 175% and 0.001 = 0.1%. This decimal to percent calculator also accepts fractions such as 3/8, handles values above 1 and below zero, and gives the fraction in lowest terms.

What the Decimal to Percent Calculator does

Type a decimal, a fraction or a mixed number and the calculator converts the decimal to a percentage, returning the percent, the decimal form and the fraction in lowest terms, with the working written out. The conversion is done on the digits you type, not on a rounded binary approximation, so 0.07 comes out as exactly 7% and a long decimal keeps every digit.

Decimal to percentage conversion works because a decimal and a percentage are two ways of writing the same number: a decimal counts in ones, a percentage counts in hundredths. Proportions, probabilities and rates are usually calculated as decimals and reported as percentages, so the conversion comes up all the time in statistics and finance. To go the other way, use the Percent to Decimal Calculator; to take a percentage of a number, use the Percentage Calculator.

How to use the Decimal to Percent Calculator

  1. Type your number into Decimal or fraction, for example 0.375, 1.5, −0.04, 3/8 or 1 1/2.
  2. Read the percentage at the top, with the fraction in lowest terms beside it.
  3. Open the step-by-step solution to see the multiplication by 100 and the decimal point moving two places to the right.
  4. Check the table of common conversions to compare your answer with nearby benchmarks such as 0.25 = 25% and 0.5 = 50%.

Decimal to Percent formula

Decimal to percent
percent = decimal × 100
Fraction to percent
percent = (numerator / denominator) × 100
Decimal with k decimal places to a fraction
decimal = (digits without the point) / 10ᵏ, then divide both by their GCD
Formula symbols
SymbolMeaning
decimalthe number in ordinary decimal form, such as 0.375
percentthe same number counted in hundredths, such as 37.5%
khow many digits follow the decimal point
GCDgreatest common divisor of the numerator and the denominator

Multiplying by 100 shifts the decimal point two places to the right. When there are not enough digits, fill the gap with zeros: 0.5 → 50%, and 2 → 200%.

The reverse conversion divides by 100: percent ÷ 100 = decimal.

Source: the symbol % stands for the number 0.01, so 0.25 = 25 × 0.01 = 25% (NIST SP 811, section 7.10.2).

Worked example

Worked example: 0.375 as a percent and as a fraction

Problem. Convert 0.375 to a percentage, then write it as a fraction in lowest terms.

  1. 01Multiply by 100: 0.375 × 100 = 37.5.
  2. 02Or move the decimal point two places to the right: 0.375 → 3.75 → 37.5.
  3. 03Attach the percent sign: 37.5%.
  4. 04As a fraction: 0.375 has three decimal places, so it is 375/1000.
  5. 05The greatest common divisor of 375 and 1000 is 125, and 375 ÷ 125 = 3, 1000 ÷ 125 = 8, giving 3/8.

Answer. 0.375 = 37.5% = 3/8. Check: 3 ÷ 8 = 0.375.

Decimal to percent chart: quick answers

Each row is the decimal times 100. The first three are the conversions people search for most often; the calculator’s own table above covers the benchmarks 1/100 to 3/2.

DecimalDecimal × 100Percent
0.001 (.001)0.10.1%
0.555555%
1.75175175%
0.0222%
0.0353.53.5%
0.151515%
0.44040%
0.66060%
0.87587.587.5%
0.999999%
1.25125125%

Decimals above 1, below 0.01 and below zero

The rule does not change at the edges, but these are the cases where mistakes happen. A decimal of exactly 1 is 100%, the whole. Anything above 1 is more than the whole and gives a percentage above 100%. Very small decimals give percentages below 1%, and it is easy to drop or add a zero.

DecimalPercentWhat it means
1100%the whole amount
1.5150%one and a half times the whole
2200%twice the whole
0.0050.5%half of one percent
0.00010.01%one basis point
−0.04−4%a fall of four percent
0.333…33.33…%one third; the 3 repeats forever

Converting a fraction to a percent

Divide the numerator by the denominator, then multiply by 100: 3/8 = 0.375 = 37.5%. If the denominator divides evenly into 100 you can scale the fraction to hundredths instead: 7/20 = 35/100 = 35%.

A fraction in lowest terms gives a decimal that ends only when its denominator has no prime factors other than 2 and 5. Fractions such as 1/3, 2/7 and 5/12 give repeating decimals, so their percentages have to be rounded or written with a fraction: 1/3 = 33.33…% = 33 1/3%.

The same two steps turn any proportion into a percentage. 27 successes in 60 trials is 27/60 = 0.45 = 45%.

Going back: percent to decimal

The reverse conversion undoes the multiplication: divide the percent by 100, or move the decimal point two places to the left. 37.5% = 0.375, 55% = 0.55, 175% = 1.75 and 0.1% = 0.001. A quick check on any answer is to convert it back and see whether you land on the number you started with. For the full working, use the Percent to Decimal Calculator.

Common use cases

  • Probabilities and proportions: report a probability of 0.05 as 5%, or a sample proportion of 0.45 as 45%.
  • Test scores: 17 correct out of 20 is 17/20 = 0.85 = 85%.
  • Rates from a spreadsheet: an interest rate stored as 0.0425 is 4.25%; a conversion rate of 0.032 is 3.2%.
  • Reading statistical output: an R² of 0.64 means 64% of the variation is explained; see the Coefficient of Determination Calculator.
  • Changes and returns: a growth factor of 1.08 is 108% of the starting value, in other words an 8% increase.

Assumptions and limitations

  • A typed decimal is treated as exact. 0.33 converts to 33%, not 33.33…%. For a repeating decimal, type the fraction (1/3) to get the exact result.
  • Do not include a % sign: 37.5% is already a percentage. For the reverse conversion use the Percent to Decimal Calculator.
  • A comma is read as a thousands separator (1,250 means 1250), unless it is a single comma that cannot be one, as in 0,375 or 12,5, which is read as a decimal comma. European grouping such as 1.234,56 is read as 1234.56.
  • Entries are limited to 60 characters, and scientific notation to exponents between −30 and 30.
  • The result is not rounded for you when it terminates. To round a long percentage to a set number of places, use the Rounding Calculator.

Frequently asked questions

How do you convert a decimal to a percent?

Multiply the decimal by 100 and add the percent sign. For 0.375: 0.375 × 100 = 37.5, so the answer is 37.5%. The shortcut is to move the decimal point two places to the right.

How do you convert a decimal greater than 1 to a percent?

Exactly the same way: multiply by 100. 1.5 becomes 150% and 2.25 becomes 225%. A percentage above 100% is not an error; it means the number is more than one whole.

How do you convert a fraction to a percent?

Divide the numerator by the denominator to get a decimal, then multiply by 100. For 5/8: 5 ÷ 8 = 0.625, and 0.625 × 100 = 62.5%. If the division never ends, as with 1/3, round the result or keep it as a fraction: 33 1/3%.

Why do you multiply by 100 to get a percent?

Percent means “per hundred”. A decimal counts how many wholes you have, and each whole contains 100 hundredths, so the number of hundredths is the decimal times 100. That is why 0.37 is 37 hundredths, or 37%.

What is .001 as a percent?

.001 (0.001) is 0.1%, one tenth of one percent. Multiply by 100: 0.001 × 100 = 0.1. As a fraction it is 1/1000.

What is 0.55 as a percentage?

0.55 is 55%. Multiply by 100, or move the decimal point two places to the right: 0.55 → 55. As a fraction in lowest terms it is 11/20.

What is 1.75 as a percent?

1.75 is 175%. 1.75 × 100 = 175. It is above 100% because 1.75 is more than one whole; as a mixed number it is 1 3/4.

What is 0.005 as a percent?

0.005 is 0.5%, half of one percent. Multiply by 100, which moves the decimal point two places to the right: 0.005 → 0.05 → 0.5. A common mistake is to read it as 5%, which is 0.05.

How do you turn a decimal into a fraction in lowest terms?

Write the digits after the decimal point over 1 followed by as many zeros as there are decimal places, then divide the top and bottom by their greatest common divisor. 0.375 = 375/1000, and dividing both by 125 gives 3/8.

Cite this page

Statculator. (2026, November 14). Decimal to Percent Calculator. Retrieved November 14, 2026, from https://statculator.com/math/decimal-to-percent-calculator/