Skip to content
Statculator
Descriptive Statistics

Geometric Mean Calculator

Find the geometric mean of numbers or percentage growth rates with steps: the product, the nth root and the log method. Includes the formula and examples.

Free, no sign-up Runs in your browserBy Hira Noor, BS MathematicsUpdated

Try
What are you averaging?
5 values

Every value must be greater than 0.

Results

Geometric mean, GM
8
Arithmetic mean (for comparison)
12.4
Count, n
5
Product, Πx
32768
Sum of logs, Σ ln x
10.3972
Mean of logs, Σ ln x / n
2.0794
Arithmetic − geometric mean
4.4
GM ÷ AM
0.6452

Interpretation: The geometric mean is 8: replacing every value by 8 keeps the product the same (8^5 = 32768). It is below the arithmetic mean of 12.4, as it always is unless all values are equal.

Values and their logarithms

#xln x
120.6931
241.3863
382.0794
4162.7726
5323.4657
Σ10.3972

Step-by-step solution

  1. 1

    Multiply the values

    Πx = 2 × 4 × 8 × 16 × 32 = 32768
  2. 2

    Take the nth root (n = 5)

    GM = 32768^(1/5) = 8
  3. 3

    Same result with logarithms

    Σ ln x = 10.3972
    Σ ln x / n = 10.3972 / 5 = 2.0794
    GM = e^2.0794 = 8

What is a Geometric Mean Calculator?

The geometric mean of n positive numbers is the nth root of their product: GM = (x₁ · x₂ · … · xₙ)^(1/n). For two numbers it is the square root of their product, so the geometric mean of 4 and 9 is √36 = 6. Use it for quantities that multiply, such as growth rates, investment returns and ratios. For percentage changes, average the growth factors (1 + r) and subtract 1 to get the steady rate that gives the same overall growth.

What the Geometric Mean Calculator does

This geometric mean calculator with steps (also called a geometric average calculator or geo mean solver) works in two modes. Choose Positive values to find the geometric mean of a list of numbers, from a pair such as 8 and 32 to a long data set pasted from a spreadsheet. Choose Growth rates (%) to find the average growth rate per period from a series of percentage changes, such as yearly returns or monthly sales growth.

Every result comes with steps: the product, the nth root, the equivalent log method (average the natural logarithms, then exponentiate) and a table of every value with its logarithm, so you can check a hand calculation line by line. The arithmetic mean is shown beside the geometric mean, and in growth-rate mode an optional starting amount shows the balance after each period, so you can see why the ordinary average overstates compounded growth.

How to use the Geometric Mean Calculator

  1. Under What are you averaging?, choose Positive values or Growth rates (%).
  2. Enter the numbers separated by commas, spaces or new lines. Every value must be greater than 0. For growth rates, type 10 for +10% and −5 for −5%; each rate must be above −100%.
  3. Optionally enter a Starting amount in growth-rate mode to see the balance after every period.
  4. Read the geometric mean (or average growth rate), then open the step-by-step solution for the product, the root and the log calculation.

How to find the geometric mean

You can calculate the geometric mean by hand in three steps. The example finds the geometric mean of 4, 8, 3, 9 and 17.

  1. Multiply all the values: 4 × 8 × 3 × 9 × 17 = 14,688.
  2. Count the values: n = 5.
  3. Take the nth root of the product: GM = 14,688^(1/5) = 6.8138. On a calculator, type 14688, press the power key (^ or yˣ) and enter (1 ÷ 5), or use the ˣ√y key.

How to find the geometric mean of two numbers

For two numbers a and b, the geometric mean is the square root of their product, √(a · b). It is the middle term of a geometric sequence: a, GM, b, where each term is the previous one multiplied by the same factor. The geometric mean of 8 and 32 is 16, and 8, 16, 32 doubles at each step.

To find the geometric mean of each pair of numbers below, multiply them and take the square root. Enter any pair into the calculator, such as 6, 48, to see the working.

NumbersProduct, a · bGeometric mean, √(a · b)
4 and 9366
2 and 18366
9 and 1614412
3 and 4814412
4 and 2510010
8 and 3225616
6 and 4828816.9706
5 and 12607.7460

Geometric mean formula

The geometric mean equation multiplies the n values and takes the nth root. Taking logarithms turns the product into a sum, which gives the log form of the same formula. Both give the same result; the log form avoids overflow when the product is very large.

Geometric mean (GM)
GM = (x₁ · x₂ · … · xₙ)^(1/n) = ⁿ√(x₁ · x₂ · … · xₙ)
Geometric mean of two numbers
GM = √(a · b)
Log method
GM = exp( (ln x₁ + ln x₂ + … + ln xₙ) / n )
Average growth rate
ḡ = [ (1 + r₁)(1 + r₂) … (1 + rₙ) ]^(1/n) − 1
Compound annual growth rate (CAGR)
CAGR = (final / initial)^(1/n) − 1
Formula symbols
SymbolMeaning
xᵢeach positive value
a, btwo positive numbers
rᵢgrowth rate in period i as a decimal (10% = 0.10)
nnumber of values or periods
ḡaverage growth rate per period

The average growth rate and CAGR are the same number: the product of the growth factors equals final ÷ initial. If you only know the start and end values, take their ratio to the power 1/n and subtract 1.

Worked example: average annual return

Problem. An investment returned +10%, −5%, +20% and +8% over four years. What was the average annual return, and what did $10,000 grow to?

  1. 01Growth factors: 1.10, 0.95, 1.20, 1.08.
  2. 02Total growth: 1.10 × 0.95 × 1.20 × 1.08 = 1.35432, a 35.432% gain, so $10,000 became $13,543.20.
  3. 03Fourth root: 1.35432^(1/4) = 1.078774, so the average return is 7.8774% per year.
  4. 04Log check: the natural logs of the factors add to 0.303299; dividing by 4 gives 0.075825, and exp(0.075825) = 1.078774.
  5. 05The arithmetic average, (10 − 5 + 20 + 8) / 4 = 8.25%, would predict 10,000 × 1.0825⁴ = $13,731.30, which is $188.10 too high.

Answer. The average annual return is 7.8774%. Growing at that steady rate for four years turns $10,000 into the same $13,543.20 as the actual returns. The 8.25% arithmetic average overstates the growth because losses and gains compound.

Geometric mean examples with solutions

Each example uses the same formula, GM = (Πx)^(1/n). The arithmetic mean is listed for comparison: it is always at least as large as the geometric mean.

DataProduct, ΠxnGeometric meanArithmetic mean
2, 4, 8, 16, 3232,7685812.4
4, 8, 3, 9, 1714,68856.81388.2
1.25, 0.8, 2, 1.6 (ratios)3.241.33751.4125
1.10, 0.95, 1.20, 1.08 (growth factors)1.3543241.0788 (7.88% a year)1.0825 (8.25%)

Geometric mean vs arithmetic mean vs harmonic mean

The three classical means answer different questions. Pick the one that keeps the quantity you care about unchanged when every value is replaced by the average. For 4 and 9 they give 6.5, 6 and 5.5385, and for positive data AM ≥ GM ≥ HM always holds.

MeanFormulaPreservesUse it for4 and 9
Arithmetic meanΣx / nthe sumscores, prices, measurements that add6.5
Geometric mean(Πx)^(1/n)the productgrowth rates, returns, ratios, indexes6
Harmonic meann / Σ(1/x)the sum of reciprocalsspeeds over equal distances, rates per unit5.5385

Geometric mean with zeros or negative numbers

The geometric mean is defined only for positive numbers, so this calculator asks for values greater than 0. Here is what goes wrong otherwise and what to do instead.

  • A zero in the data makes the product 0, so the geometric mean is 0 no matter what the other values are. That result says nothing useful about the data.
  • Negative numbers can make the product negative, and a negative number has no real square root, fourth root or other even root. Even when an odd root exists, the result has no meaning as an average.
  • Negative returns are fine once converted to growth factors: −20% becomes 0.80, which is positive. Use the Growth rates (%) mode, which does this for you. Only a loss of 100% or more breaks it.
  • Data that include zeros, such as counts, are sometimes shifted by adding a constant (often 1) to every value, taking the geometric mean, and subtracting the constant again. The answer depends on the constant chosen, so state it whenever you report the result.

How to calculate the geometric mean in Excel or Google Sheets

Both Excel and Google Sheets have a built-in function: =GEOMEAN(A1:A10) returns the geometric mean of the values in A1 to A10. It returns a #NUM! error if any value is 0 or negative.

For an average growth rate, put the growth factors (1 + r) in a column, for example 1.10, 0.95, 1.20 and 1.08 in B1:B4, and use =GEOMEAN(B1:B4) − 1. Format the cell as a percentage to read 7.88%. You can paste the same column into this calculator to see each step of the calculation.

Common use cases

  • Investing: average annual return or CAGR of a fund or portfolio over several years.
  • Business growth: average monthly or yearly growth in revenue, users or sales. For a single period, use the Percentage Change Calculator.
  • Biology and demography: average growth rate of a population or a bacterial culture.
  • Ratios and indexes: averaging ratios, price relatives or normalized benchmark scores, where the geometric mean does not depend on which item is used as the base.
  • Homework: check a hand calculation of the product, the nth root and the logarithms against the step-by-step solution.

Assumptions and limitations

  • Every value must be greater than 0. See the section on zeros and negative numbers above for what to do with returns and shifted data.
  • The geometric mean describes past compounded growth; it does not predict future returns or measure risk. Report volatility with the standard deviation of returns.
  • For quantities that add rather than multiply, such as test scores, the arithmetic mean or the Average Calculator is the right choice. For rates over equal amounts, such as speeds over equal distances, use the Harmonic Mean Calculator.

Frequently asked questions

How do you calculate a geometric mean?

Multiply all n values together and take the nth root of the product. For 2, 8 and 4, the product is 64 and the cube root of 64 is 4, so the geometric mean is 4. Equivalently, average the natural logarithms of the values and exponentiate the result.

How do you find the geometric mean of two numbers?

Multiply the two numbers and take the square root: GM = √(a × b). For 9 and 16 the product is 144, so the geometric mean is √144 = 12. For 6 and 48 it is √288 ≈ 16.9706.

What is the geometric mean of 8 and 32?

The geometric mean of 8 and 32 is 16, because 8 × 32 = 256 and √256 = 16. Note that 8, 16, 32 is a geometric sequence: 16 is 2 times 8, and 32 is 2 times 16.

How do you find the geometric mean of 4, 8, 3, 9 and 17?

Multiply the five values to get 14,688, then take the fifth root: 14,688^(1/5) ≈ 6.8138. The arithmetic mean of the same numbers is 41 / 5 = 8.2, which is higher, as it always is unless all values are equal.

How do you find the geometric mean on a calculator?

Multiply the values, then raise the product to the power 1/n. On most scientific calculators type the product, press ^ (or yˣ) and enter (1 ÷ n) in brackets; some have an ˣ√y key that does the same. For a long list, add the natural logs (ln) of the values, divide by n, and press eˣ.

How do I find the average growth rate from percentages?

Convert each percentage to a growth factor (for example +12% becomes 1.12 and −4% becomes 0.96), take the geometric mean of the factors, and subtract 1. The result is the constant rate per period that produces the same overall growth.

Why is the geometric mean lower than the arithmetic mean?

For positive numbers that are not all equal, the geometric mean is always below the arithmetic mean (the AM–GM inequality). With returns, the gap reflects volatility: a 50% gain followed by a 50% loss averages 0% arithmetically, yet leaves you with 75% of your money, a geometric average of about −13.4% per period.

Is the geometric mean the same as CAGR?

Yes, when applied to growth factors. CAGR = (ending value / starting value)^(1/n) − 1, and the ending value divided by the starting value equals the product of the yearly growth factors, so CAGR equals the geometric mean of the factors minus 1.

Can I take the geometric mean of negative numbers or zero?

No. A zero forces the product, and therefore the geometric mean, to be 0, and negative numbers can make the product negative, which has no real even root. Percentage returns can be negative, but their growth factors (1 + r) stay positive as long as no period loses 100% or more.

Cite this page

Statculator. (2026, November 14). Geometric Mean Calculator. Retrieved November 14, 2026, from https://statculator.com/descriptive-statistics/geometric-mean-calculator/