Skip to content
Statculator
P-Values & Critical Values

Chi-Square Critical Value Calculator

Free chi-square critical value calculator and table. Get the χ² critical value for any df and α, right-, left- or two-tailed, with steps and a shaded curve.

Free, no sign-up Runs in your browserBy Hira Noor, BS MathematicsUpdated

Try

k − 1 for goodness of fit, (r − 1)(c − 1) for independence, n − 1 for a variance.

Usually 0.05 or 0.01.

Tail

Right for goodness-of-fit and independence tests. Left or two-tailed for tests and intervals about one variance.

Results

Critical value χ²* (right-tailed)
12.5916
P(χ² ≥ 12.5916) = 0.05
Degrees of freedom
6
Significance level, α
0.05
Area in the tail
0.05
Mean of χ²(df)
6
Median of χ²(df)
5.3481
Decision rule
Reject H₀ if χ² ≥ 12.5916

Interpretation: With 6 df, a χ² statistic of 12.5916 or more is significant at α = 0.05. That is 2.1 times the distribution’s mean of 6, so the statistic has to be well above its expected value before you reject H₀.

chi2 distribution curve with the shaded probability region, markers at χ²* = 12.592χ²* = 12.5920246810121416182022Chi-square distribution, df = 6
Shaded: rejection region with total area α = 0.05. Dashed line: critical value.

Chi-square critical values for df = 6

αLeft-tailed (α below)Right-tailed (α above)Two-tailed (α/2 each side)
0.12.204110.64461.6354 and 12.5916
0.051.635412.59161.2373 and 14.4494
0.0251.237314.44940.9482 and 16.2445
0.010.872116.81190.6757 and 18.5476
0.0050.675718.54760.5266 and 20.2494
0.0010.381122.45770.2994 and 24.1028

Right-tailed values are the ones printed in most χ² tables and used for goodness-of-fit and independence tests.

Step-by-step solution

  1. 1

    Decide where α goes

    Goodness-of-fit and independence tests reject H₀ only for large χ², so all of α sits in the right tail.

    α = 0.05 in the right tail
  2. 2

    Translate the tail areas into cumulative probabilities

    Upper: P(χ² ≤ c) = 1 − α = 0.95
  3. 3

    Invert the χ² CDF with df = 6

    The inverse of the regularized incomplete gamma function has no closed form, so it is solved numerically.

    Upper critical value = χ²⁻¹(0.95; 6) = 12.5916
  4. 4

    Use the critical value

    Reject H₀ if χ² ≥ 12.5916

What is a Chi-Square Critical Value Calculator?

A chi-square critical value calculator finds the χ² value that cuts off an area α in the tail of a chi-square distribution with a given number of degrees of freedom. Chi-square tests of goodness of fit and independence use the right tail: for df = 6 at α = 0.05 the critical value is 12.5916, so you reject H₀ when χ² ≥ 12.5916. Two-tailed mode returns the lower and upper values used for a variance.

What the Chi-Square Critical Value Calculator does

Enter the degrees of freedom and α and choose the tail. The calculator returns the critical value (or both values for a two-tailed test), shades the rejection region on the χ² curve, and lists left-tail, right-tail and two-tailed critical values for six common α levels at your df. Any positive df works, so you are not limited to the rows of a printed chi-square table. In effect it is a chi-square critical value table for every df and α at once, with the working shown step by step.

Right-tailed values are what you compare a goodness-of-fit or independence statistic against. Left-tailed and two-tailed values are for inference about a single population variance or standard deviation: a test of H₀: σ² = σ₀², or a confidence interval for σ² built from (n − 1)s² / χ².

How to use the Chi-Square Critical Value Calculator

  1. Enter the Degrees of freedom (df): k − 1 for k categories (minus one per estimated parameter), (r − 1)(c − 1) for an r × c table, or n − 1 for a variance.
  2. Enter the Significance level (α), for example 0.05.
  3. Choose the Tail. Leave it on Right for goodness-of-fit and independence tests; use Two-tailed for a two-sided variance test or a variance confidence interval.
  4. Read the critical value and the rejection rule. The table lists values for other α levels at the same df.

How to find the chi-square critical value

To determine the critical value of chi-square by hand you need three things: the degrees of freedom, the significance level α and the tail of the test. Then read it from a table or compute the χ² quantile.

  1. Work out df. Goodness of fit: categories − 1 − estimated parameters. Independence in an r × c table: (r − 1)(c − 1). One variance: n − 1.
  2. Choose α. 0.05 is the usual default; 0.01 is stricter.
  3. Pick the tail. Chi-square tests of goodness of fit and independence are always right-tailed. Variance tests can be left-, right- or two-tailed.
  4. Look up the value. In the chi-square critical value table below, go to the row for your df and the column for your α. For a two-tailed test use α/2 in the right tail for the upper value and 1 − α/2 for the lower value, or let the calculator do both.

Using the critical value in a chi-square test

The critical value in a chi-square test is the cut-off your test statistic is compared with, using the same df and α:

  • If the chi-square statistic is greater than (or equal to) the critical value, it lands in the rejection region. Reject H₀: the observed counts differ from the expected counts more than chance alone would explain at that α.
  • If the chi-square statistic is less than the critical value, it falls short of the rejection region. Do not reject H₀. This is not proof that H₀ is true; the data are simply consistent with it.
  • The decision always agrees with the p-value: χ² ≥ critical value exactly when p ≤ α. Use the P-Value from Chi-Square Calculator for the exact p-value.
  • Example: a die rolled 60 times gives the counts below, so χ² = 13.4 with df = 6 − 1 = 5. The critical value at α = 0.05 is 11.0705. Because 13.4 exceeds 11.0705, reject H₀ that the die is fair (p ≈ 0.0199).
Example: a die rolled 60 times (expected 10 per face)
Face123456
Observed58981020
(O − E)² / E2.50.40.10.4010.0

Chi-square critical value formula

Critical values are quantiles of the χ² distribution, written here as χ²⁻¹(p; df) for the value with cumulative probability p.

Right-tailed
c = χ²⁻¹(1 − α; df) → reject if χ² ≥ c
Left-tailed
c = χ²⁻¹(α; df) → reject if χ² ≤ c
Two-tailed
c_L = χ²⁻¹(α/2; df), c_U = χ²⁻¹(1 − α/2; df)
Confidence interval for a variance
(n − 1)s² / c_U ≤ σ² ≤ (n − 1)s² / c_L
Formula symbols
SymbolMeaning
c, c_L, c_Ucritical values (single, lower, upper)
dfdegrees of freedom
αsignificance level
s², nsample variance and sample size

Karl Pearson introduced the chi-square goodness-of-fit test in 1900. Tables disagree on notation. Many write χ²₀.₀₅ for the value with 0.05 to its right (the right-tailed critical value); others index by the cumulative area, so the same number appears as χ²₀.₉₅. The calculator states the tail area explicitly to avoid the ambiguity.

The inverse χ² CDF has no closed form, so it is found numerically. For large df a quick check is c ≈ df + z·√(2·df): for df = 100 at α = 0.05 that gives 123.3, close to the exact 124.342. Values here agree with the NIST/SEMATECH e-Handbook table of chi-square critical values.

Worked example: χ² critical values for a 95% variance interval

Fill weights: n = 25, s² = 16 g²

Problem. A sample of n = 25 fill weights has variance s² = 16 g². Find the χ² critical values for a 95% confidence interval for σ² and compute the interval.

  1. 01df = n − 1 = 24, and a two-sided 95% interval puts α/2 = 0.025 in each tail.
  2. 02Lower critical value: χ²⁻¹(0.025; 24) = 12.4012.
  3. 03Upper critical value: χ²⁻¹(0.975; 24) = 39.3641.
  4. 04Interval: 24 × 16 / 39.3641 = 9.7551 and 24 × 16 / 12.4012 = 30.9649.

Answer. The 95% confidence interval for σ² is about 9.76 to 30.96 g², or 3.12 to 5.56 g for σ. It is not centred on s² = 16 because the χ² distribution is skewed.

Chi-square critical value table

This chi-square critical value chart (a table of critical values for chi-squared) gives right-tail values: each entry leaves the column’s α in the right tail of χ²(df). These are the critical values for chi-square tests of goodness of fit and independence. For a two-tailed or left-tailed value, or any df not listed, use the calculator above. The full chi-square table also prints the left-tail values (right-tail areas 0.995 to 0.90) used for variance tests and intervals.

Right-tail critical values of chi-square, χ²(α; df)
dfα = 0.10α = 0.05α = 0.025α = 0.01α = 0.005
12.7063.8415.0246.6357.879
24.6055.9917.3789.21010.597
36.2517.8159.34811.34512.838
47.7799.48811.14313.27714.860
59.23611.07012.83315.08616.750
610.64512.59214.44916.81218.548
712.01714.06716.01318.47520.278
813.36215.50717.53520.09021.955
914.68416.91919.02321.66623.589
1015.98718.30720.48323.20925.188
1117.27519.67521.92024.72526.757
1218.54921.02623.33726.21728.300
1319.81222.36224.73627.68829.819
1421.06423.68526.11929.14131.319
1522.30724.99627.48830.57832.801
1623.54226.29628.84532.00034.267
1724.76927.58730.19133.40935.718
1825.98928.86931.52634.80537.156
1927.20430.14432.85236.19138.582
2028.41231.41034.17037.56639.997
2129.61532.67135.47938.93241.401
2230.81333.92436.78140.28942.796
2332.00735.17238.07641.63844.181
2433.19636.41539.36442.98045.559
2534.38237.65240.64644.31446.928
2635.56338.88541.92345.64248.290
2736.74140.11343.19546.96349.645
2837.91641.33744.46148.27850.993
2939.08742.55745.72249.58852.336
3040.25643.77346.97950.89253.672
4051.80555.75859.34263.69166.766
5063.16767.50571.42076.15479.490
6074.39779.08283.29888.37991.952
8096.578101.879106.629112.329116.321
100118.498124.342129.561135.807140.169

Chi-square critical values in Excel, R, Python and on a TI-84

Every package returns the same quantile; they differ only in whether they take the right-tail area α or the cumulative area 1 − α. The examples use df = 6 and α = 0.05, which all return 12.5916.

ToolRight-tailed critical valueLeft-tailed critical value
Excel / Google Sheets=CHISQ.INV.RT(0.05, 6)=CHISQ.INV(0.05, 6)
Rqchisq(0.05, 6, lower.tail = FALSE)qchisq(0.05, 6)
Python (SciPy)chi2.isf(0.05, 6)chi2.ppf(0.05, 6)
TI-83 / TI-84Most models have no inverse χ² function: solve χ²cdf(X, 1E99, 6) = 0.05 for X with the equation solverSolve χ²cdf(0, X, 6) = 0.05 for X

Common use cases

Assumptions and limitations

  • Critical values for count-data tests rely on the χ² approximation, which needs adequate expected counts (commonly all at least 5).
  • Variance tests and intervals built from these values assume normally distributed data and are not robust to skewness or heavy tails.
  • Using the wrong df is the most common error: remember to subtract estimated parameters in goodness-of-fit tests.
  • For the p-value of an observed statistic rather than the cut-off, use the P-Value from Chi-Square Calculator.

Frequently asked questions

How do you find the critical value in a chi-square test?

Use the test’s degrees of freedom and significance level and take the right-tail value, because chi-square tests reject for large statistics. For df = 3 and α = 0.05 the critical value is 7.8147, so a χ² statistic above 7.8147 is significant. This calculator gives the value for any df, not just the rows printed in a table.

What is the chi-square critical value at α = 0.05?

It depends on df. For a right-tailed test at α = 0.05 the critical value is 3.841 for 1 df, 5.991 for 2 df, 9.488 for 4 df, 12.592 for 6 df and 18.307 for 10 df. Enter any df above to get the exact value.

Are critical values chi-square values?

Yes. A chi-square critical value is a point on the χ² scale, the same scale as your test statistic, so the two can be compared directly. It is the χ² value with exactly α of the distribution beyond it. Your test statistic is computed from data; the critical value depends only on df and α.

Is the chi-square critical value always right-tailed?

For goodness-of-fit and independence tests, yes, because only large χ² values indicate disagreement with H₀. Left-tailed and two-tailed critical values are used only for tests and confidence intervals about a single variance.

Why are the two-tailed chi-square critical values not symmetric?

The chi-square distribution is skewed to the right and starts at zero. Putting α/2 in each tail produces a lower cut-off close to 0 and an upper cut-off far out in the long right tail, so the two values are not equally spaced around the centre.

How do I find the degrees of freedom for a chi-square test?

For goodness of fit, df = number of categories − 1 − number of estimated parameters. For a test of independence in an r × c table, df = (r − 1)(c − 1). For a test or interval about one variance, df = n − 1. The Degrees of Freedom Calculator handles each case.

What if my χ² statistic is greater or less than the critical value?

If the statistic is greater than or equal to the right-tailed critical value, it falls in the rejection region, so you reject H₀ at that α; equivalently its p-value is at most α. If it is less than the critical value, you do not reject H₀.

Cite this page

Statculator. (2026, November 14). Chi-Square Critical Value Calculator. Retrieved November 14, 2026, from https://statculator.com/p-values-critical-values/chi-square-critical-value-calculator/