What is a 5 Number Summary Calculator?
A 5 number summary calculator sorts your data and reports the minimum, first quartile (Q1), median, third quartile (Q3) and maximum. These five values, also called the five-figure summary, split the data into four parts with roughly equal counts, show the center, spread and skew at a glance, and are exactly the numbers used to draw a box plot.
What the 5 Number Summary Calculator does
Paste a dataset and this five number summary calculator returns the five-number summary, the IQR and range, any values beyond the 1.5 × IQR outlier fences, a box plot, and a table of how wide each quarter of the data is. Open the steps to see how each of the five numbers was found.
The five-number summary is a compact description that works for any shape of data. Unlike the mean and standard deviation, its middle three numbers are not distorted by a few extreme values, and comparing the widths of the four quarters shows immediately whether the data are skewed and in which direction. In the UK it is often called the five-figure summary; the numbers are the same.
How to use the 5 Number Summary Calculator
- Type or paste your numbers into Data values. They can be separated by commas, spaces or new lines, and do not need to be sorted.
- Choose a Quartile method that matches your course, calculator or software, or keep the default used by the TI-84 and most textbooks.
- Read the five numbers in order, minimum to maximum, along with the IQR and range.
- Use the box plot and the “Width of each quarter” table to judge spread and skew, and check the outlier line for values beyond the fences.
Quartile method: exclusive or inclusive median?
The minimum, median and maximum never change, but Q1 and Q3 depend on the quartile method. When n is odd, the exclusive method (TI-84 and most textbooks) leaves the median out of both halves, while the inclusive method (Tukey’s hinges, R’s fivenum) puts it in both. Excel and R’s summary() interpolate between values instead; Hyndman and Fan (1996, The American Statistician) catalogue nine such sample-quantile definitions. For the 13 puzzle times above, the four methods offered here give:
| Quartile method | Used by | Q1 | Q3 | Five-number summary |
|---|---|---|---|---|
| Median of halves, exclusive | TI-84, most textbooks, this page’s default | 12.5 | 20 | 9, 12.5, 16, 20, 34 |
| Median of halves, inclusive | Tukey’s hinges, R fivenum() | 13 | 19 | 9, 13, 16, 19, 34 |
| Interpolation, (n − 1)p + 1 | Excel QUARTILE.INC, Google Sheets QUARTILE, R summary() | 13 | 19 | 9, 13, 16, 19, 34 |
| Interpolation, (n + 1)p | Excel QUARTILE.EXC, Minitab | 12.5 | 20 | 9, 12.5, 16, 20, 34 |
Five-number summary formula
After sorting the data as x₁ ≤ x₂ ≤ … ≤ xₙ:
| Symbol | Meaning |
|---|---|
| xᵢ | i-th smallest value |
| n | number of values |
| M | median (Q2) |
Bowley’s quartile skewness ranges from −1 to 1. It is 0 when the median sits exactly in the middle of the box, positive when the upper half of the box is wider (right skew) and negative for left skew.
Worked example
Worked example: puzzle completion times (odd n)
Problem. Thirteen people finished a puzzle in 14, 9, 21, 17, 12, 25, 11, 16, 19, 13, 34, 15, 18 minutes. Find the five-number summary.
- 01Sort the data: 9, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 25, 34.
- 02Minimum: the first sorted value, 9.
- 03Median: n = 13 is odd, so the median is the 7th value, 16.
- 04Q1: the lower half without the median is 9, 11, 12, 13, 14, 15, so Q1 = (12 + 13) / 2 = 12.5.
- 05Q3: the upper half is 17, 18, 19, 21, 25, 34, so Q3 = (19 + 21) / 2 = 20.
- 06Maximum: the last sorted value, 34.
Answer. The five-number summary is 9, 12.5, 16, 20, 34, with IQR = 7.5 and range = 25. The top quarter (20 to 34) is four times as wide as the bottom quarter (9 to 12.5), so the times are right-skewed, and 34 lies beyond the upper fence of 20 + 1.5 × 7.5 = 31.25, so it is a possible outlier.
Five-number summary example with an even number of values
Eight students scored 72, 85, 64, 90, 78, 81, 69, 95 on a test. With an even count there is no single middle value, so the data split cleanly into two halves of four.
- Sort: 64, 69, 72, 78, 81, 85, 90, 95. Minimum = 64, maximum = 95.
- Median = (78 + 81) / 2 = 79.5, the average of the 4th and 5th values.
- Lower half 64, 69, 72, 78, so Q1 = (69 + 72) / 2 = 70.5.
- Upper half 81, 85, 90, 95, so Q3 = (85 + 90) / 2 = 87.5.
- Five-number summary: 64, 70.5, 79.5, 87.5, 95. IQR = 17, range = 31, and the fences 45 and 113 flag no outliers.
- Excel’s QUARTILE.INC gives Q1 = 71.25 and Q3 = 86.25 for the same data, because it interpolates. Neither answer is wrong; state the method you used.
How to find the five-number summary in Excel, Google Sheets, TI-84 and R
Every common tool can produce the five numbers, but they do not all use the same quartile method, so Q1 and Q3 may differ slightly from a hand calculation.
- Excel: with data in A1:A20, use =MIN(A1:A20), =QUARTILE.INC(A1:A20,1), =MEDIAN(A1:A20), =QUARTILE.INC(A1:A20,3) and =MAX(A1:A20). Swap in QUARTILE.EXC for the (n + 1)p method.
- Google Sheets: the same formulas work; =QUARTILE(A1:A20,1) is equivalent to QUARTILE.INC.
- TI-83 / TI-84: press STAT → 1:Edit and enter the values in L1. Press STAT → CALC → 1:1-Var Stats, then Enter, and scroll down to minX, Q1, Med, Q3 and maxX.
- R: fivenum(x) returns the five numbers using Tukey’s hinges; summary(x) returns the minimum, quartiles (interpolated), median, mean and maximum.
- This page: pick the matching option under Quartile method and the results will agree with your tool.
From five numbers to a box plot (and back)
John Tukey introduced the five-number summary and the box plot together in Exploratory Data Analysis (1977). A box plot draws the five-number summary on a number line. The box runs from Q1 to Q3 with a line at the median, so its width is the IQR. In a skeletal box plot the whiskers run to the minimum and maximum. In the more common modified box plot, shown here, the whiskers stop at the most extreme values within 1.5 × IQR of the box and anything beyond is plotted as a separate point.
To read a five-number summary from a box plot, take the left end of the box as Q1, the line inside it as the median and the right end as Q3. The minimum and maximum are the ends of the whiskers, unless separate outlier points are drawn: then the most extreme point is the minimum or maximum.
To compare several groups, use the box plot maker, which draws up to six box plots on one axis.
Common use cases
- Exploring a new dataset: get center, spread and skew in five numbers before choosing a summary or test.
- Reporting skewed data: salaries, house prices and reaction times are better described by quartiles than by mean and SD.
- Comparing groups: five-number summaries side by side reveal differences in level and spread.
- Homework and exams: the five-number summary and box plot are standard topics in introductory statistics, AP Statistics and GCSE maths.
Assumptions and limitations
- Small datasets give different Q1 and Q3 under different quartile methods; state which one you used.
- Five numbers cannot show gaps, clusters or multiple peaks. Pair the summary with a histogram or stem-and-leaf plot.
- The minimum and maximum are single observations and can be extreme or erroneous; check them with the outlier fences.
- For quartiles alone use the Quartile Calculator; for a fuller picture including the mean and standard deviation, use the Descriptive Statistics Calculator.
Frequently asked questions
What are the five numbers in a five-number summary?
How do I calculate a 5-number summary?
What is a 5 figure summary in maths?
How does the five-number summary show skewness?
Is the five-number summary affected by outliers?
Why does my TI-84 or Excel give a different Q1 or Q3?
Cite this page
Statculator. (2026, November 14). 5 Number Summary Calculator. Retrieved November 14, 2026, from https://statculator.com/descriptive-statistics/5-number-summary-calculator/