Skip to content
Statculator
Charts & Graphs

Pie Chart Maker

Free pie chart maker: enter categories and values to make a pie or donut chart with percentages and slice angles. No sign-up. Download PNG or SVG.

Free, no sign-up Runs in your browserBy Hira Noor, BS MathematicsUpdated

Try
Categories and values
#CategoryValueRemove row
1
2
3
4
5
6
Tip: paste rows straight from a spreadsheet.

One category per row. Values must be zero or positive and add up to a meaningful total; they do not need to be percentages.

Chart type
%

Slices below this share of the total are merged into one “Other” slice. Leave blank to keep every slice.

Results

Pie chart of 6 categoriesRent: 1200 (48%)48%Groceries: 450 (18%)18%Transport: 240 (9.6%)9.6%Utilities: 180 (7.2%)7.2%Entertainment: 150 (6%)6%Savings: 280 (11.2%)11.2%Rent 48%Groceries 18%Transport 9.6%Utilities 7.2%Entertainment 6%Savings 11.2%
Slices run clockwise from 12 o’clock.
Total
2500
6 slices
Largest slice
Rent: 48%
1200 of 2500, angle 172.8°
Smallest slice
Entertainment: 6%
150 of 2500, angle 21.6°
Number of slices
6
Total
2500
Largest share
48%
Largest angle
172.8°
Smallest share
6%
Smallest angle
21.6°
Two largest slices together
66%
Share if split equally, 100% / slices
16.67% (60°)

Interpretation: Rent is the largest slice: 48% of the total, an angle of 172.8°. The smallest is Entertainment at 6% (21.6°). The two largest slices together make up 66% of the total.

Slices: value, percent and angle

CategoryValuePercent of totalAngle
Rent120048%172.8°
Groceries45018%64.8°
Transport2409.6%34.56°
Utilities1807.2%25.92°
Entertainment1506%21.6°
Savings28011.2%40.32°
Total2500100%360°

Angle = percent × 3.6°. Rows follow the chart, clockwise from 12 o’clock. Rounded percentages may not add to exactly 100%.

Step-by-step solution

  1. 1

    List the categories and their values

    Rent: 1200
    Groceries: 450
    Transport: 240
    Utilities: 180
    Entertainment: 150
    Savings: 280
  2. 2

    Add the values to get the total

    T = 1200 + 450 + 240 + 180 + 150 + 280 = 2500
  3. 3

    Divide each value by the total to get its share

    Multiply by 100 to write the share as a percentage.

    Rent: 1200 / 2500 × 100 = 48%
    Groceries: 450 / 2500 × 100 = 18%
    Transport: 240 / 2500 × 100 = 9.6%
    Utilities: 180 / 2500 × 100 = 7.2%
    Entertainment: 150 / 2500 × 100 = 6%
    Savings: 280 / 2500 × 100 = 11.2%
  4. 4

    Convert each share to an angle

    A full circle is 360°, so each percentage point is worth 3.6°.

    Rent: 48% × 3.6° = 172.8°
    Groceries: 18% × 3.6° = 64.8°
    Transport: 9.6% × 3.6° = 34.56°
    Utilities: 7.2% × 3.6° = 25.92°
    Entertainment: 6% × 3.6° = 21.6°
    Savings: 11.2% × 3.6° = 40.32°
    check: the angles add up to 360°
  5. 5

    Draw the circle and mark off the slices

    Start at 12 o’clock and work clockwise, taking the slices in the order you entered them. Each slice begins where the previous one ended.

    Rent: 0° → 172.8°
    Groceries: 172.8° → 237.6°
    Transport: 237.6° → 272.16°
    Utilities: 272.16° → 298.08°
    Entertainment: 298.08° → 319.68°
    Savings: 319.68° → 360°

What is a Pie Chart maker?

A pie chart maker turns a list of categories and values into a circle divided into slices, where each slice’s angle is proportional to its share of the total: a category with 25% of the total gets a 90° slice. This free pie chart generator draws a pie or donut chart with percentages on the slices, and lists every category’s value, percent of total and angle in degrees.

What the Pie Chart Maker does

Enter category names and values and the tool adds them up, converts each value to a percentage of the total and to an angle out of 360°, and draws the chart starting at 12 o’clock and moving clockwise. You can switch between a pie and a donut, label slices with percentages or values, order the slices from largest to smallest, merge small slices into a single “Other” slice, add a title and download the result as PNG or SVG.

It works as a pie chart generator, donut chart maker and pie chart calculator in one: the chart, the percentage table and the angle for every slice appear together, so you can use the image in a report or draw the same circle graph by hand. It is free, needs no sign-up, adds no watermark and runs in your browser, so your data are not uploaded.

A pie chart answers one question: how is a single total divided among a few categories? It works when the categories do not overlap, the values add up to a meaningful whole (a budget, a vote count, a market) and there are no more than five or six slices. For ranking many categories or comparing values that are close together, a bar chart is easier to read, and the sections below explain how to tell which chart you need.

How to use the Pie Chart Maker

  1. Under Categories and values, enter one row per category: a name in Category and a number of zero or more in Value. Two columns pasted from a spreadsheet fill the rows automatically.
  2. Choose Pie or Donut under Chart type, and pick what the Slice labels show: percent, value or nothing.
  3. Set Slice order to Largest first to rank the slices clockwise, or keep the order you entered.
  4. To tidy a chart with several tiny slices, enter a threshold in Combine slices smaller than (%). Slices below it are merged into “Other”.
  5. Add a Chart title and download the chart with the PNG or SVG button. A PNG drops straight into Word, Google Docs, PowerPoint or Google Slides; an SVG stays sharp at any size. The table underneath gives each percentage and angle, which is what you need to draw the chart by hand with a protractor.

Pie chart formulas

Each slice takes the same fraction of the 360° circle as its value takes of the total.

Total
T = Σ vᵢ
Percent of total
pᵢ = vᵢ / T × 100%
Slice angle
θᵢ = vᵢ / T × 360° = pᵢ × 3.6°
Check
Σ pᵢ = 100% Σ θᵢ = 360°
Formula symbols
SymbolMeaning
vᵢvalue of category i (zero or positive)
Tsum of all the values
pᵢcategory i as a percentage of the total
θᵢcentral angle of slice i, in degrees

One percent of the total is 3.6°, because 360° / 100 = 3.6°. A 25% slice is a right angle (90°) and a 50% slice is a half circle (180°).

Rounded percentages do not always add to exactly 100%. Angles here are calculated from the unrounded shares, so the slices always close the circle.

A donut chart uses exactly the same angles; only the centre of the circle is removed.

Rows that share a category name are added together before the shares are calculated, and a category with a value of 0 gets no slice.

Worked example

Worked example: a monthly budget

Problem. A household spends $2,500 a month: Rent 1,200, Groceries 450, Transport 240, Utilities 180, Entertainment 150 and Savings 280 (the default data). Find the percentage and the angle of each slice.

  1. 01Total: 1,200 + 450 + 240 + 180 + 150 + 280 = 2,500.
  2. 02Rent: 1,200 / 2,500 × 100 = 48%, and 48 × 3.6° = 172.8°.
  3. 03Groceries: 450 / 2,500 × 100 = 18%, so the angle is 18 × 3.6° = 64.8°.
  4. 04Transport: 9.6% and 34.56°. Utilities: 7.2% and 25.92°. Entertainment: 6% and 21.6°. Savings: 11.2% and 40.32°.
  5. 05Check: 48 + 18 + 9.6 + 7.2 + 6 + 11.2 = 100%, and 172.8 + 64.8 + 34.56 + 25.92 + 21.6 + 40.32 = 360°.

Answer. Rent takes almost half of the circle (48%, 172.8°), and rent plus groceries make up 66% of spending. The four smaller slices lie between 6% and 11.2%, close enough that the printed percentages, not the slice sizes, are what tell them apart.

Make a pie chart from a table or raw data

The maker needs one value per category. Where those values come from decides the first step:

  • A table in Excel or Google Sheets. Select the category column and the value column together, copy, and paste into the first Category cell. Each spreadsheet row becomes one slice.
  • Percentages you already have. Enter them as the values. If they add up to 100, each slice shows the same percentage; if they do not, check for a missing category or for answers that overlap, such as a survey question with several answers allowed, which a pie chart cannot show.
  • Raw responses, such as a list of survey answers. Count how many times each answer occurs first. The Frequency Distribution Calculator does the tally, and its frequency column is exactly the value column a pie chart needs.
  • Counts that repeat a category. Rows with the same name are added into one slice, so a list such as “Bus 3, Car 5, Bus 2” gives a Bus slice of 5.

How to draw a pie chart by hand

Exam questions often ask for a pie chart drawn with a compass and a protractor. The angle column in the results table gives every number you need.

  1. Add the values to find the total.
  2. For each category, work out value ÷ total × 360° to get its angle. Check that the angles add up to 360°.
  3. Draw a circle and a radius from the centre straight up to 12 o’clock.
  4. Place the protractor on that radius and mark the first angle; draw the second radius. Measure each next slice from the line you just drew.
  5. Label each slice with its category and percentage, or add a key, and give the chart a title.

When not to use a pie chart

People judge lengths more accurately than angles or areas, so a pie chart is a weak tool for precise comparison. It does one job well: showing that one part dominates, or that two or three parts make up most of a whole. Avoid it in these situations:

  • Many categories. Beyond about six slices the pieces become slivers, the labels no longer fit and the colours start to repeat. Combine the small slices into “Other”, or switch to a horizontal bar chart.
  • Similar values. Slices of 22%, 24% and 26% look alike. A bar chart shows the ranking at once.
  • Comparisons across charts. Two pies side by side (this year against last year, one region against another) force readers to compare angles between circles. Bars on one shared axis do this far better.
  • Values that are not parts of one whole. Averages, rates, temperatures, and survey questions where people can tick several answers do not add up to a meaningful 100%.
  • Negative values. A slice cannot have a negative size, so profits and losses, or changes up and down, cannot be drawn as a pie.
  • Change over time. A trend needs time on an axis: use a line chart or a bar chart.

Pie chart vs bar chart

Both charts display one number per category. The choice depends on what the reader should take away. If in doubt, draw the bar chart: it is rarely worse than the pie and often much clearer. To work out a single share without drawing anything, use the Percentage Calculator.

Pie or donut chartBar chart
What the reader comparesAngles and areas of slicesLengths of bars on a shared axis
Message it carries bestEach part’s share of one wholeThe size and ranking of each category
Comfortable number of categories2 to 62 to 30 or more with horizontal bars
Close values, such as 24% and 26%Hard to tell apartEasy to tell apart
Values must add up to a meaningful totalYesNo
Negative valuesNot possibleSupported

Pie, donut or 3D pie chart?

A donut chart is a pie chart with the centre removed. The slices have the same angles and the same percentages; readers judge the lengths of the arcs instead of the areas of the wedges. The empty centre leaves room for a total or a headline figure, which you can add in your own design software, and the ring tends to look lighter on a slide.

A donut shares every limitation of a pie chart, so the same rules apply: few slices, clearly different sizes, parts of one whole.

This maker does not draw 3D pie charts on purpose. Tilting the circle makes the slices at the front look larger than slices of the same size at the back, and the visible edge adds area that belongs to no category, so the chart no longer shows the true shares. A flat pie or donut shows the same data without that distortion.

Common use cases

  • Budgets and spending: how a monthly budget or a project’s costs divide among a few headings.
  • Survey questions with one answer per person: the share of respondents choosing yes, no or not sure.
  • Market or vote share: a small number of parties, brands or products that together make up 100%.
  • School assignments: converting a frequency table into percentages and angles to draw a pie chart with a protractor.
  • Composition: the make-up of a mixture, a portfolio or a population by a handful of groups.

Assumptions and limitations

  • Values must be zero or positive and must be parts of one total. For anything else, including data with negative values, use a bar chart.
  • More than about six slices is hard to read, and beyond twelve the colours repeat. Use Combine slices smaller than (%) or a bar chart.
  • Small differences between slices cannot be judged by eye. Print the percentages on the slices, or use bars when the ranking matters.
  • A label is drawn inside a slice only when the slice is at least about 5.5% of the circle. Smaller slices are identified by the legend and the table.
  • The chart is flat and starts at 12 o’clock. Tilted 3D pies and “exploded” slices distort the areas and are deliberately not offered.
  • One pie shows one total. To compare the make-up of two groups, plot their percentages as bars on the same axis.

Frequently asked questions

Is this pie chart maker free?

Yes. The pie chart maker is free, needs no account or sign-up and adds no watermark. Enter the categories and values, and the pie or donut chart, the percentages and the slice angles update as you type. Download the chart as PNG for a slide or SVG for a report; the data stay in your browser.

How do I make a pie chart with percentages?

Enter each category with its value, which can be a count, an amount or a percentage, and keep Slice labels set to Percent. The maker divides each value by the total, prints the percentage on every slice large enough to hold a label, and lists all the percentages and angles in the table under the chart.

How do you calculate the angle of each slice in a pie chart?

Divide the category’s value by the total and multiply by 360°. Equivalently, multiply its percentage by 3.6°. A category worth 450 out of a total of 2,500 is 18% of the whole, so its slice has an angle of 18 × 3.6° = 64.8°.

How do you work out the percentages for a pie chart?

Add all the values to get the total, then divide each value by the total and multiply by 100. For 1,200 out of 2,500 the share is 1,200 / 2,500 × 100 = 48%. The percentages of all the slices add up to 100%, apart from small rounding differences.

When should you not use a pie chart?

Avoid a pie chart when there are more than about six categories, when the values are close together, when you need to compare two or more groups, or when the values do not add up to a meaningful whole. A bar chart is clearer in those cases, because readers compare bar lengths much more accurately than slice angles.

What is the difference between a pie chart and a donut chart?

A donut chart is a pie chart with a hole in the middle. Both divide a circle in proportion to each category’s share of the total and use identical angles, so they carry the same information. The donut’s empty centre can hold a total or a title, but it is no easier to read than a pie.

How many slices should a pie chart have?

Aim for two to six slices. With more, the smallest slices become too thin to label or compare. Order the slices by size and merge the smallest into an “Other” slice, which this tool does when you enter a threshold in Combine slices smaller than (%), or use a bar chart instead.

Can a pie chart show negative numbers or zero?

No. The size of a slice represents a share of a total, and a share cannot be negative, so this tool rejects negative values. A category with a value of 0 has no slice and is left out of the chart. Data that include negative values, such as profits and losses, belong on a bar chart.

Do the percentages in a pie chart have to add up to 100?

Yes. The slices are parts of one whole, so their exact shares always sum to 100% and their angles to 360°. Rounded figures can add up to 99.9% or 100.1%, which is a rounding effect and not an error. If your own percentages do not total 100, as with a survey question that allows several answers, a pie chart is the wrong chart.

Cite this page

Statculator. (2026, November 14). Pie Chart Maker. Retrieved November 14, 2026, from https://statculator.com/charts/pie-chart-maker/